Cooler Master / Antec Centurion Hard Drive Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Even with the printer calibrated, I was having problems with shrinkage pulling the pins on the original part closer…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Even with the printer calibrated, I was having problems with shrinkage pulling the pins on the original part closer together. After scaling to compensate didn't help and not caring about it being tool less, I just changed the pins to counter bores located on the original pins.
Added a second set of mounting points for 2.5 inch drive adapters.
Without the pins it may be printed flat on the bed.
The pins on the original are off center. I didn't bother to fix that because the tolerances are really loose and it works just fine.
Print Settings
Printer:
Folger Tech Kossel
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
10%
Filament:
FilaCube PLA2
Notes:
I used a brim to keep the end from coming loose.
Category: Computer