Cooler Master / Antec Centurion Hard Drive Rail
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Even with the printer calibrated, I was having problems with shrinkage pulling the pins on the original part closer…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 86
- Makes
- 0
- Views
- 530
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Even with the printer calibrated, I was having problems with shrinkage pulling the pins on the original part closer together. After scaling to compensate didn't help and not caring about it being tool less, I just changed the pins to counter bores located on the original pins.
Added a second set of mounting points for 2.5 inch drive adapters.
Without the pins it may be printed flat on the bed.
The pins on the original are off center. I didn't bother to fix that because the tolerances are really loose and it works just fine.
Print Settings
Printer:
Folger Tech Kossel
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2mm
Infill:
10%
Filament:
FilaCube PLA2
Notes:
I used a brim to keep the end from coming loose.
Category: Computer