Counting matching models…
Introduction There are already a lot of adapters for Mirka Deros Sanders . But either they are for the old Deros sanders, didn't fit well, had a weak structure or I just didn't liked them. Therefore, I have created three own adapters with…
Derived from Festool vacuum MFT hood by ggragg , to vacuum while working on the bench. Use a Insta-Dog to attach to the MFT table. Has internal radial pins to connect to the 27mm CLEANTEC hose.
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
A simple cable holder for the Festool Cleantec CT 15 E. I do not know if this could still work with other models of. It would be possible. Stowing the cable in the back gives you more room for accessories in the top compartment. It is…
Some time ago I printed the festool cleantec female part by PwnCnC (from thingiverse) and it kinda worked. But if not mountet properly it leaks a lot of air. And it wiggled loose many times in my case :( Also it is very easy to overturn…
Replacement adapter to 36mm cleantec hose. It does not swivel, preventing the hose to get stuck on the rails. The side panel of the tracksaw needs to disassembled to install the new adapter.
This adapter connects any Festool machine with a Cleantec connector to any Miele vacuum using a tube with a mechanism as the one in the picture! Also check out the remix from user 'crossi86' here: https://www.thingiverse.com/thing:4936333…
it fits in the systainer 3 and the older models as well.
Festool cleantec 36mm vacuum cleaner nozzle good for wet cleaning of fabric like car seats.
A simple adapter to connect a Makita RT0700c to a Festool 36mm Cleantec hose. Festool end is based on PwnCNC’s design: https://www.thingiverse.com/thing:3818625 This print does not require supports. My print was PLA+ with 40% infill and…
Antec Case Rail Replacement rails for an Antec case. I was repurposing one of my computers to be an Unraid ( https://unraid.net/ ) server, and while moving things around, I broke one of the rails that hold in the hard drives. I looked at…
Used the original model from Thingiverse (Huge thanks to rafloel this is a great model) and replaced it with the mirrored thread from Chrisfu Quick connect exhaust hose, because this thread fits well with the original hose from the AC (I…
festool cleantec 36mm adapter v2 can be used to crate any other adapter for festool cleantec 36mm
Dewalt DCW210 Cordless Sander to Festool Cleantec Adapter This adapter allows a Festool Cleantec dust extractor to be used with the Dewalt Cordless sander (O-Ring also required). This sander is generally a good design with the exception…
Needed an adapter for my Milwaukee M18 sander so I created this. It's based on this design: https://www.thingiverse.com/thing:3818625
Adapter to connect Festool Cleantec accessory (model: D27 DM-AS CT Number: 10019348) to a regular 32mm vacuum hose I had this festol accessory in the house which is for the 27mm vacuum hose that I don't have but I wanted to use it on a…
Remix from https://www.thingiverse.com/thing:4861771 , added a CLEANTEC connector. Knob is from https://www.thingiverse.com/thing:3713327
This is a Festool cleantec adapter for the Triton JOF001 Router. Dies ist ein Festool cleantec Adapter für die Triton JOF001 Oberfräse. small donation for a coffee paypal.me/renesoukup Thanks Print Settings Printer Brand: Anycubic…
It will suck itself to the wall or ceiling if you glue some foam to the back.
I remixed the adapter from @gwendal ( https://www.printables.com/model/68024-pj7000-festool-adapter ) since his was not properly working with my Festool Cleantec.
Hello. DISCLAIMER: This is one of my first projects when I was trying to learn fusion 360/ CAD by my own. Contains errors, and can be better, but I think now It's sufficent to be released and other users can use it :) , I learned a lot…
This is a Festool cleantec adapter for the Mirka Deros sander. Dies ist ein Festool cleantec Adapter für den Mirka Deros Schleifer. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Yes Supports: Yes Resolution: 0.2…
This is a part for the original hose adapter for the Mafell MT55 cc plunge-cut saw. The original part is exchanged with this part. This part is for the Festool cleantec hose connect. Dies ist ein Schauchanschluss für den originalen…
Slightly tighter fit for Cleantec adapter. 36.5 mm vs 37.5mm inside diameter.
This is a replacement cover for the Marantec M3-631 garage door opener remote control that mounts outside the door. The original parts were not designed well and the plastic cover and housing gets brittle with age and exposure to the…
Festool cleantec vacum hose to female OsVac 32 mm Adapter,
Easy to print, faceplate for antec 300 optical drive.
Ich habe eine Halterung für eine Fernbedienung der Marke Marantec Digital 572 erstellt. Sie kann an der Sonnenblende befestigt werden. Ich empfehle mit PETG, ABS oder ASA zu drucken, da es im Auto sehr warm werden kann und PLA sich sehr…
Remixed AnthonyZ71's OpenSCAD design so that it prints 2 rails fast without supports // Antec Three Hundred Two (302) 3.5" Hard Drive mounting rails (remix of https://www.printables.com/model/112341-antec-three-hundred-two-302-35-hdd-rail…
Festool CLEANTEC hose adapter for 3M Xtract Random Orbital Sander. Threads right into the sander (reverse thread) and Festool hose stays snugly in place.
I wanted to use the model from Big Rocket Project to connect a Festool D27 DM-AS CT Number: 10019348. Unfortunately the Festool Cleantec Adapter isn't available any longer (looks like they're selling a new version now). So I bought the…
Rails for mounting a 3.5 hard drive in an Antec Eleven Hundred (1100) case.
Designed this to adapt to the Festool Cleantec port on my track saw to be able to avoid having to pay my other arm and leg to afford the cleantec vac. So with one arm and one leg left still, I have this adapter, and have used it in PETG…
Easy to print, requires little supports for the clips, only touching the buildplate is enough
Replacement 5.25" bay cover for an Antec Twelve Hundred computer case. I forgot that I had this case and accidentally threw away the top two 5.25" bay slot covers so I recreated them. Print Settings Printer Brand: Creality Printer: Ender…
Even with the printer calibrated, I was having problems with shrinkage pulling the pins on the original part closer together. After scaling to compensate didn't help and not caring about it being tool less, I just changed the pins to…
Osvac adapter for the hand pipe from Festool. Simply remove the original insert (best with two slotted screwdrivers) and insert the printed one. It clicks in the same way and also has the anti-rotation lock. Clearly better than the…
This part is for the Festool cleantec hose connect. This adapter is designed to connect the Festool Cleantec holder and the suction device of the Mafell 135 and the Mafell 185 circular saw. – German Version – Der Anschluss ist für den…
Based on the excellent model of the Festool Cleantec adapter from PwnCNC, I have adapted the model to fit the extraction socket of the Metabo KGS 216 M.
[EN] My Marantec Comfort 220 garage door stopped opening properly. The cause was that the reference point that activates the switch inside the drive had fallen off the toothed belt. A replacement reference point can be purchased as a…
Three FreeCAD design files are available for download. The design files can be used to change the model’s dimensions via the spreadsheet within the model file. If dimensions are changed within the spreadsheet, the model will update to…
his is a part for the original hose adapter for the Makita DHS680Z saw. The original part is exchanged with this part. This part is for the Festool cleantec hose connect. update: additional nose for better grip Dies ist ein…
This is a 3.5" Antec-style drive bay cover modified to provide two USB 3.0 and one USB 3.1 Type C front ports. For the ports, I used: https://www.amazon.com/gp/product/B01KJPUI5W and https://www.amazon.com/gp/product/B0755DDD9B connected…
Dewalt DW680 Planer to Festool Cleantec CT Extractor hose adapter. Print Settings Printer: Velleman Vertex K8400 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 100% Filament: Sunlu PETG Grey Notes: Print upright with a brim…
Vacuum adapter for Bosch PEX 220A sander. Fits a vacuum hose of festool cleantec (D27/36 bayonet) I used screws to connect to the original sander dust port, as the clip solutions (even the original bosch accessories) don't really stay…
Allgemeines Staubabsaugung für die 12V Kanten Fräse von Bosch Professional (GKF 12V-8) Der Sauganschluss wurde bewusst nach unten ausgerichtet, damit dieser zu wenig wie möglich stört. Der Anschluss ist auf einen 36mm Festool Cleantec…
Dewalt 18V Cordless Circular Saw to Festool Cleantec extractor hose adapter. Print Settings Printer: Velleman Vertex K8400 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 100% Filament: Sunlu PETG Grey Notes: Printed using…
Cover for the Kreg Jig 320 to collect dust with a CLEANTEC connect. Reuse the Kreg clamp adapter pad to ease positioning. To make sure the connection between the plate and the connector is solid, the in-fill is bumped to 35%. The first…
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw. Pretty straightforward, I tried to keep it compact and close to the original. I'll post adjustments if I make any. Fusion 360 file…
Remix of Tom_DD's "5.25" DVD/Blu-Ray Drive Enclosure/Sleeve" to accommodate a Vantec NexStar USB 3.0 to SATA 6Gbps Optical/Storage Adapter. Full and Bottom sections modified, Top part is the same as original but included for completeness.…
A little sanding/trimming on the mounting pins is needed if you want to be able to remove the rails easily from the HDD without too much force,
I modeled the Festool adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter printed in PETG
The FreeCAD design file is included for download. The design file can be used to change the model’s dimensions via the spreadsheet within the model file. If dimensions are changed within the spreadsheet, the model will update to reflect…
The FreeCAD design file is included for download. The design file can be used to change the model’s dimensions via the spreadsheet within the model file. If dimensions are changed within the spreadsheet, the model will update to reflect…
This is a remix combining the router side of the OF900 Router Vacuum adapter for 35 mm by Jonas Lang and the vacuum hose side of the festool cleantex 36mm adapter v2 by Gawel C. Both the router side and the cleantec side have bumps for…
Antec Elevenhundred HDD and SSD rails. SSD rails untested since there's nowhere to use them with :) (yet). Meaning the SSD rails are just a miniature versions.
This is a mounting rail for the 5.25" cage in an Antec P180 case. These will likely work on other Antec cases of the same era and style, such as the P183. The 5.25" frame in the pics comes from here:…
End cap for Festool dust extractor CLEANTEC Ensures a completely closed vacuum cleaner for dust-free transport thanks to closure cap The grip surface makes it easy to remove the adapter printed in PETG
Onshape: https://cad.onshape.com/documents/d3c9773a82515a4372ebc977/w/f3b137426196eae3cd8c03d2/e/dc62aa22f914060c4f186f3d?renderMode=0&uiState=668c0cdf2de9c071e9b4ca69
I had an old case in the attic and built my parents a PC, however it was missing a front drive cover and i was building without a CD/DVD Drive. So i put this together and printed it. It was so long ago i cant remember much about settings…
This adapter connects the 22 mm dust port of the Makera Carvera CNC to the 36 mm Cleantec hose system of Festool vacuum cleaners. It allows you to use a Festool dust extractor as an external vacuum instead of the internal dust collection…
Stackable dual HDD tray for the Antec P101/Silent This can be used to replace the 5.25' drive bay with another 2 HDDs.
Replacement front panel for Antec P180 5.25 inch drive bay. 2 versions provided: one blank and one with hole for USB connector. Designed to be printed with 0,4mm nozzle and 0,2mm layer height.
I use 3 140mm bottom fans for intake on my PC and the case is great for that, but thee stock case feet cover a lot of the fans so I made this. The feet are 50mm tall allowing extra airflow and they have a built in air filter holder just…
This 3D model is a custom-designed adapter that connects smaller Festool Cleantech tool ports to standard 27mm vacuum hoses, offering a snug and reliable fit for efficient dust extraction. Designed with precision and compatibility in…
I combined the SSD tray and HD rails and then modified it to fit my Antec 302 case. Category: Computer
Hello. Needed a tallest top lid to allow better clearance for large heatsink, (scythe shuriken), the case has firm mounting, spend some time making test to achieve a good fitment. (You can see in the attached photos). Print with 0.20…
This is an adapter for Festool R0 150 FEQ eccentric sanding machine and Kärscher Professional NT/1 Tact vacuum cleaner. Festool sanding machine uses Cleantec fastening system. The adapter may well fit other models too, but these is what I…
One of the door retainer clips on my P101S broke when I was trying to close it. This should be a drop in replacement. It prints perfectly flat on the bed.
I have a NAS server with the Antec P101 Silent Case. When the side panel clip broke I made this one to raplace it and figured, why not share with others that may be searching for this too.
Festool CLEANTEC hose adapter for Ridgid R4251 & R4241 and Delta Cruzer miter saws (only tested on Ridgid R4251). Re-use the screw that attaches the original hose adapter to the saw.
Hose Adapter for Einhell Sander and Festool Cleantec
Hier können Sie eine simple Halterung für eine Fernbedienung herunterladen. Gedruckt in Material4Print Tough PLA mit Organic Stützstrucktur
Print as-is without supports. Keep the perimeters and infill low so it has some flex. I chose to make this a snap-in and not as secure as a twist lock so a specific orientation isn't required. The tradeoff is a bit of holding power, but…
Replacement for the CLEANTEC angled pice for dust extraction for the Festool TS 55 plunge saw. Printed in PETG. FreeCAD file downloadable and customizable.
A simple adapter for the Festool Cleantec connector system, such as the one on the TS55 track saw to the Centec hose system.
To connect the 27mm festool cleantec hose to a wire brush, to collect concrete dust at the source. TPU is required, as the hollow broom connector get a lot of stress from the hose weight.
In order to create a very stable connection, I used four components: Two 3D printed parts (the adapter and a support block) A spare 5mm Allen key cut to a length of about 70mm Plastic tie straps Adapter assembly (see notes on pictures for…
A simple wall mount for the Hantech AC remote that you stick onto the wall with double sided tape
I (re)designed this support bracket to provide better stability for an MSI RTX 5070 Ti Ventus 3X graphics card inside an
Connects an OF1010 router to a festool vacuum. I printed using a brim due to the chamfer on the bottom, not sure if it is needed though.
This is a simple Headset clip to go on the top of a Antec900 PC case . Category: Computer
Gedruckt mit Prusa MK3s auf Prusa Slicer 2.6 Alpha mit organic Support 15% Infill, mind. 0,2 mm Auflösung und PETG!
Adapter for 38 mm vacuum cleaner hose to Festool Cleantec. I use it for the standard hose of my Bosch Professional GAS 20 L SFC. Cleantec D 27 DM-AS/CT is needed. The Hose is just crewed into the adapter. Thanks to the Inner taper, the…
Enhancment of the original dust outlet of the Festool BS 75 belt sander, which is very weak and anoying. This model enhances: Ability to use CLEANTEC vacuum nozzle More Steady thanks to aditional fasteing with a screw The dust outlet is…
I modeled the Festool adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter printed in PETG
This attachemend could used via IoBroker, A-Echo, zigbee Hub.. see Amazon Open and Close Position are tracked because the magnet travels on the sled! Nice to switch Zigbee LED Stribes when Door is open/close/drives. Send Messages,…
replacment clip for Marantec garagedoor remote opener
adaptateur festool cleantec pour tuyau d'aspirateur Karcher WD 115mm de long et v2 réduit a 82mm
Entretoise permettant le montage d'un amortisseur, pour durcir la pédale d'origine
Leider passen die originalen Schienen des Antec P182 nicht am Delock USB3 Hub. Kurzerhand wurden 2 Schienen modelliert und ausgedruckt. Die 2 vorderen Schrauben mussten einem Zapfen weichen, da der Platz nicht gereicht hat.
glifo que lo puedes imprimir para dije o para escultura
Antec CX600M Trio Case Cable Grommet. This PC case does not come with a cable grommet so I made one that should fit nicely for better asthetic; perhaps a bit better air circulation segregation between the two chamber of the case.…
This model does not do much on it's own, you can use it as a startingpoint to other adapters. When printing, ensure to add a brim and supports for the inside. The nubbins on the inside don't need supports.
Adapter to use a different PCIe riser cable with the non-standard screw pattern in the Antec Striker case. Designed and tested with the LINKUP - AVA5 PCIE 5.0 Riser Cable but will likely work with others. Fusion file included for tweaking…
![[REMIX] Shorter Festool Cleantec to Miele Vacuum Adapter](https://media.printables.com/media/prints/27fd9ef6-616f-4786-b605-c4fe1df2421a/images/12154564_249507b9-cf61-4361-a7ef-951b1b452273_a94777c5-6b95-4fb0-a67b-8f4faca55448/26-02-25-10-05-58-0326.jpg)
