Toy Train Box Car BRIO / IKEA compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toy Train Box Car BRIO / IKEA compatible
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 355
- Wydruki
- 4
- Wyświetlenia
- 1662
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Box Car toy train (BRIO / IKEA compatible)
A big thank you to SCHWEINERT.COM
Without your fantastic Locomotives and Tanker Car, I would not have been inspired to design this Box Car. No train is complete without Coal Cars and Box Cars.
I am using the same wheels and wheel pivots as the SCHWEINERT.COM Tanker Car. I take not credit for this design as it works flawlessly. I have included them in my downloads for your convenience.
You will need 10 screws to put everything together.
8x ISO 14585 2.9mm x 13mm
2x ISO 14585 2.9mm x 19mm
You can add magnets on each side of the tank car by using 2x ISO 14585 2.9mm x 13mm screws a plastic washer and small neodymium ring magnets diameter 10mm outer / 4mm inner with height of 5mm.
Also check out my Coal Car.