1 / 2
Glove Box Air Valve Adapter for Volkswagen MKIV — zdjęcie 1
1 / 2

Glove Box Air Valve Adapter for Volkswagen MKIV

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,42 € – 0,51 € netto (bez VAT)

Dla pliku: v2_split_right_glove_box_air_valve_adapter_for_vw_mkiv_0.3mm_PETG_MK3S_28m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,46 € netto (środek widełek).

Masa podana przez autora
6 g
Czas druku podany przez autora
28,2 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Retrofit the glove box air vent in your Volkswagen MKIV

Ocena
0 / 5
Polubienia
14
Pobrania
62
Wydruki
1
Wyświetlenia
1449
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

v2 Update 6/18/2022

Angled the adapter 30° counterclockwise, added flange for the hose to butt up against, made the connector end bow out slightly to improve the seal between the hose and connector.

___

If you want to retrofit the glove box air vent in your MK4 Volkswagen Golf/Jetta, the easiest and cheapest way is to pull the parts from a B5 Passat. The only issue is that the Passat HVAC box has mounting tabs which aren't present on the Golf/Jetta.

This 3D printable adapter modifies 3B1820701 to replicate 1J0816355 which came standard on Skoda variants. The connector is designed to interface with the Passat air hose.

Print both halves and glue together with plastic glue. Then glue the assembly to the back of the glove box valve.

You'll need to drill a hole in the HVAC box after the AC condenser, but before the blend doors to ensure only cold air in pumped into the glove box. For reference, the Passat HVAC box has the hole drilled into the top of the box.
 

Required parts:

3B1816311 - Air hose

3B0816355 - Glove box valve

 

Loctite Plastic Bonder Glue:

https://www.homedepot.com/p/100371829

 

Reference Part Numbers:

3B1820701 - Air vent

1J0816355 - Glove box valve w/connector (not used)

 

You can find source files on my github as well:
https://github.com/XDleader555/cad_models/tree/main/for_vw_mkiv_-_glove_box_air_valve_adapter

Tagi