Vyper Lack Extension Leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
152mm Leg Extension for IKEA Lack
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 1056
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix from Thingiverse model. https://www.thingiverse.com/thing:2780267
4x screws per leg need to secure to the lower tabletop.
Remixed the model above to be compatible with the Anycubic Vyper. I also added slopes to the inner column to close the gap to avoid overhangs. support is needed touching the build plate and I recommend having a raft for adhesion.
Leg extension measures at 152mm, sleeve is 29.5mm deep with 4.5mm wall. Lower corner bracket 38mm deep with 4x offset holes intended for M3 wood screws.
I printed with a 0.6mm nozzle at 35mm/s, 100% infill, brim of 30 lines and 15% triangular support touching build plate.
There’s just over an inch of space above the unit. I didn’t create enclosure feet for plex as I’m not sure if I will end up doing that.