Vyper Lack Extension Leg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
152mm Leg Extension for IKEA Lack
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 59
- Makes
- 1
- Views
- 1,056
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix from Thingiverse model. https://www.thingiverse.com/thing:2780267
4x screws per leg need to secure to the lower tabletop.
Remixed the model above to be compatible with the Anycubic Vyper. I also added slopes to the inner column to close the gap to avoid overhangs. support is needed touching the build plate and I recommend having a raft for adhesion.
Leg extension measures at 152mm, sleeve is 29.5mm deep with 4.5mm wall. Lower corner bracket 38mm deep with 4x offset holes intended for M3 wood screws.
I printed with a 0.6mm nozzle at 35mm/s, 100% infill, brim of 30 lines and 15% triangular support touching build plate.
There’s just over an inch of space above the unit. I didn’t create enclosure feet for plex as I’m not sure if I will end up doing that.