1 / 3
VESA 200 hard drive bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hide your storage media behind your TV!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple VESA 200 bracket to mount a 2.5'' HDD enclosure on the back of the TV.
It'll fit any enclosure smaller than 81.5mm wide and 17 mm thick and you'll need M6 screws to attach the bracket. Check this if unsure about the VESA standard screw sizes.
If you need the mirrored version, just mirror it in your slicer app!
I attached is the Fusion360 file so you can remix it.
Supports are a little bit tricky to remove, so be wary of that. Wear eye protection!
Pictured is a LG NanoCell TV and an ORICO USB-C enclosure.