RatRig V-Core 3 3030 Wiring Ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wiring Ducts that are the same width as the 3030 extrusions on the RatRig V-Core 3.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 1351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
These wire ducts are designed to attach to the 3030 extrusion at the bottom of the electronics portion of the RatRig V-Core 3. There are 4 different lengths of ducts depending on the size of the V-Core (200mm, 300mm, 400mm, 500mm). They are sized so that two complete wire ducts will fit across the bottom with clearance on either end.
Hardware Required:
6 x M6x12 SHCS
6 x M6 3030 Drop In Nuts
Print BOM:
Choose based on your printer size!
2 x 300 Wiring Duct Top
2 x 300 Wiring Duct Bottom
Print Parameters:
Material: PLA, PETG, ABS, etc.
Recommended Settings: 0.4 mm Nozzle, 0.2 mm Slice Height, 3 Bottom, Top and External Perimeters, 15% or greater infill.
Secondary Settings: 0.6 mm Nozzle, 0.3 mm Slice Height, 3 Bottom, Top, and External Perimeters, 15% or greater infill.
I have successfully printed these files using both of the recommended settings.
Supports: None
If you print in the below orientation there should be no need for supports.
