RatRig V-Core 3 3030 Wiring Ducts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wiring Ducts that are the same width as the 3030 extrusions on the RatRig V-Core 3.
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 163
- Makes
- 1
- Views
- 1,351
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
These wire ducts are designed to attach to the 3030 extrusion at the bottom of the electronics portion of the RatRig V-Core 3. There are 4 different lengths of ducts depending on the size of the V-Core (200mm, 300mm, 400mm, 500mm). They are sized so that two complete wire ducts will fit across the bottom with clearance on either end.
Hardware Required:
6 x M6x12 SHCS
6 x M6 3030 Drop In Nuts
Print BOM:
Choose based on your printer size!
2 x 300 Wiring Duct Top
2 x 300 Wiring Duct Bottom
Print Parameters:
Material: PLA, PETG, ABS, etc.
Recommended Settings: 0.4 mm Nozzle, 0.2 mm Slice Height, 3 Bottom, Top and External Perimeters, 15% or greater infill.
Secondary Settings: 0.6 mm Nozzle, 0.3 mm Slice Height, 3 Bottom, Top, and External Perimeters, 15% or greater infill.
I have successfully printed these files using both of the recommended settings.
Supports: None
If you print in the below orientation there should be no need for supports.
