1 / 1
Mercury 1 - Mod files for Voron Afterburner and Cable Chain 10x20 — zdjęcie 1

Mercury 1 - Mod files for Voron Afterburner and Cable Chain 10x20

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are the modded files, that I used for my ZeroG/Mercury 1 build with 2 MGN9H rails for the Voron Afterburner.

Ocena
0 / 5
Polubienia
16
Pobrania
94
Wydruki
0
Wyświetlenia
1823
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are the files used to update  the ZeroG/Mercury 1 to use 2 MGN9H rails and the Voron Afterburner.  You will need to use the 2.8mm shim plate to keep the belt alignment perfect otherwise it will dip in.

The chain mount is for a 10x20 openable chain and the tower.  You will use unscrew 2 screws from the Nema17 from the CW and use them to tie the chain plate into the back of the motor.  Be sure to measure your screw length and you may need to go a bit longer and or dremel one to custom length.

Tagi