1 / 1
Mercury 1 - Mod files for Voron Afterburner and Cable Chain 10x20
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are the modded files, that I used for my ZeroG/Mercury 1 build with 2 MGN9H rails for the Voron Afterburner.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 94
- Makes
- 0
- Views
- 1,834
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are the files used to update the ZeroG/Mercury 1 to use 2 MGN9H rails and the Voron Afterburner. You will need to use the 2.8mm shim plate to keep the belt alignment perfect otherwise it will dip in.
The chain mount is for a 10x20 openable chain and the tower. You will use unscrew 2 screws from the Nema17 from the CW and use them to tie the chain plate into the back of the motor. Be sure to measure your screw length and you may need to go a bit longer and or dremel one to custom length.