BALL HANDLE 40mm DIAMETER - FOR MACHINES M8 M10 M16...
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
made for various machinery, easily scalable for other thread types metric, inch and Whitworth
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 120
- Wydruki
- 2
- Wyświetlenia
- 427
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ball end for various handles and levers - see attached drawings
Made this for my drill press and lathe as they always get broken
Scale it up or down for your application, there are few different sizes to start from, all of them are 40mm in diameter
Thread is supposed to be made upon installation on M8 and M16, while M10 has complete threads for print. This is because thread is not easily scalable, some fit (M10x1.5 scale 1.2-> M12x1.8...) so for other thread types just aim for the hole to be under size so it taps itself while screwing on the handle.
Few suggestions for lever installation:
- Heat up the handle and screw on the ball end
- Screw on the ball end using belt wrench (for oil filters) or by hand using leather or rubber glove for better grip
- Print oversize for easy fit
- Use tap drill to make correct threads before installation
Some handles don't have threads on the end so filament friendly epoxy can be used or scale to make a press fit handle (exact measurements are in the attached drawing)
LIKE SHARE COMMENT
my other designs
https://www.printables.com/social/296116-the-sloppy-apprentice/models
https://www.thingiverse.com/thesloppyapprentice/designs
Take a look at my youtube channel:
https://www.youtube.com/channel/UCqKU0euRjGItYjY0grGPFjw