1 / 3
BALL HANDLE 40mm DIAMETER - FOR MACHINES M8 M10 M16... — image 1
1 / 3

BALL HANDLE 40mm DIAMETER - FOR MACHINES M8 M10 M16...

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

made for various machinery, easily scalable for other thread types metric, inch and Whitworth

Rating
5 / 5
Likes
12
Downloads
120
Makes
2
Views
427
Reviews
2

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Ball end for various handles and levers - see attached drawings

Made this for my drill press and lathe as they always get broken

Scale it up or down for your application, there are few different sizes to start from, all of them are 40mm in diameter

Thread is supposed to be made upon installation on M8 and M16, while M10 has complete threads for print. This is because thread is not easily scalable, some fit (M10x1.5 scale 1.2-> M12x1.8...) so for other thread types just aim for the hole to be under size so it taps itself while screwing on the handle. 

Few suggestions for lever installation:

  • Heat up the handle and screw on the ball end
  • Screw on the ball end using belt wrench (for oil filters) or by hand using leather or rubber glove for better grip
  • Print oversize for easy fit
  • Use tap drill to make correct threads before installation

Some handles don't have threads on the end so filament friendly epoxy can be used or scale to make a press fit handle (exact measurements are in the attached drawing)

LIKE SHARE COMMENT

my other designs 

https://www.printables.com/social/296116-the-sloppy-apprentice/models

https://www.thingiverse.com/thesloppyapprentice/designs

Take a look at my youtube channel:

 https://www.youtube.com/channel/UCqKU0euRjGItYjY0grGPFjw

 

Tags