Plastic Model Runner Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of my Gunpla runners tipping over on a light and flimsy stand. Made one of my own with a heavy base and some lean.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 696
- Wydruki
- 4
- Wyświetlenia
- 3324
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Tired of my gunpla runners tipping over on a light and flimsy stand. Made one of my own with a heavy base and some lean.
15 slots, with 10mm gaps. Will fit most HG kits, unless it is a nightingale/ xi. Will probably need 2/3 bases for RG and MG kits.
Could have more slots but I don't have an XL/ large format printer.
Recommended print settings:
[Base]
0.3mm layer height, 2 walls, 10% gyroid infill, brim 3mm.
*It will take the whole MK3 print bed, some adjustments required. (sorry Mini users)
[Shoulder]
0.2mm or lower layer height, 2 walls, 10% gyroid infill, support from base.
**This print uses quite a bit of filament (200-300g), print at your own wallet/ or if looks doesn't matter, just use trash/ leftover filament.
Have fun watching the first layer. ;)