Plastic Model Runner Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of my Gunpla runners tipping over on a light and flimsy stand. Made one of my own with a heavy base and some lean.
- Rating
- 5 / 5
- Likes
- 89
- Downloads
- 696
- Makes
- 4
- Views
- 3,324
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Tired of my gunpla runners tipping over on a light and flimsy stand. Made one of my own with a heavy base and some lean.
15 slots, with 10mm gaps. Will fit most HG kits, unless it is a nightingale/ xi. Will probably need 2/3 bases for RG and MG kits.
Could have more slots but I don't have an XL/ large format printer.
Recommended print settings:
[Base]
0.3mm layer height, 2 walls, 10% gyroid infill, brim 3mm.
*It will take the whole MK3 print bed, some adjustments required. (sorry Mini users)
[Shoulder]
0.2mm or lower layer height, 2 walls, 10% gyroid infill, support from base.
**This print uses quite a bit of filament (200-300g), print at your own wallet/ or if looks doesn't matter, just use trash/ leftover filament.
Have fun watching the first layer. ;)