1 / 3
GoPro Compatible Mount for Ikea Skadis
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for IKEA SKÅDIS pegboards that is compatible with GoPro and the Modular Mounting System.
- Ocena
- 4,333 / 5
- Polubienia
- 64
- Pobrania
- 273
- Wydruki
- 3
- Wyświetlenia
- 1196
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (1)Kolekcje (153)Powiązane
Action cameras need action mounts! This is a very strong mount for IKEA SKÅDIS pegboards that is compatible with GoPro cameras and accessories as well as the Modular Mount System. It uses the Skadis T-Nuts for a very secure hold and easy installation.
 | Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. |
- Check out the Modular Mounting System Arms for compatible arms and knobs.
- You can use any GoPro-compatible knob, including original ones.
You can choose between a mount with the knob on the left or on the right.
BOM
| Qty | Description | Sourcing |
|---|---|---|
| 2 | M2.5 DIN934 Hex Nut | Aliexpress |
| 2 | M2.5 Socket Head Cap Screw | Aliexpress |
Printed Parts
| Qty | Part | Download |
|---|---|---|
| 2 | Skadis T-Nut M2.5 | Download here |
| 1 | Mount with Knob Left or Mount with Knob Right | this project |
Printing
The STL files are pre-rotated. Print them as-is.
- Layer height: 0.2mm
- Extrusion width: 0.4mm
- Perimeters: 6 (important for strength!)
- Infill: 20% or more
- Solid layers: 4 top, 4 bottom
- Supports: None
Assembly & Installation
- Assemble the parts as shown below.
- Leave the T-Nuts loose so that there's at least 2mm between the T-Nut and the printed mount.
- For installation, orient the T-Nuts in the vertical position and stick them through the pegboard holes.
- Tighten the M2.5 screws. The T-Nut will automatically orient itself in the horizontal position.
