1 / 3
GoPro Compatible Mount for Ikea Skadis
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for IKEA SKÅDIS pegboards that is compatible with GoPro and the Modular Mounting System.
- Rating
- 4.333 / 5
- Likes
- 64
- Downloads
- 273
- Makes
- 3
- Views
- 1,196
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Action cameras need action mounts! This is a very strong mount for IKEA SKÅDIS pegboards that is compatible with GoPro cameras and accessories as well as the Modular Mount System. It uses the Skadis T-Nuts for a very secure hold and easy installation.
 | Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. |
- Check out the Modular Mounting System Arms for compatible arms and knobs.
- You can use any GoPro-compatible knob, including original ones.
You can choose between a mount with the knob on the left or on the right.
BOM
| Qty | Description | Sourcing |
|---|---|---|
| 2 | M2.5 DIN934 Hex Nut | Aliexpress |
| 2 | M2.5 Socket Head Cap Screw | Aliexpress |
Printed Parts
| Qty | Part | Download |
|---|---|---|
| 2 | Skadis T-Nut M2.5 | Download here |
| 1 | Mount with Knob Left or Mount with Knob Right | this project |
Printing
The STL files are pre-rotated. Print them as-is.
- Layer height: 0.2mm
- Extrusion width: 0.4mm
- Perimeters: 6 (important for strength!)
- Infill: 20% or more
- Solid layers: 4 top, 4 bottom
- Supports: None
Assembly & Installation
- Assemble the parts as shown below.
- Leave the T-Nuts loose so that there's at least 2mm between the T-Nut and the printed mount.
- For installation, orient the T-Nuts in the vertical position and stick them through the pegboard holes.
- Tighten the M2.5 screws. The T-Nut will automatically orient itself in the horizontal position.
