[V-Core 3] McAbra's PSU Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PSU cover for V-Core 3's back panel.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This PSU cover is made for V-Core 3's back panel. You use M5 screws to attach the clips to the panel and M4 screws to attach the PSU to the clip. The cover itself requires M3 x D4.6 x L4.0 heat inserts and M3 screws.
I used it on Meanwell RSP-200-24 PSUs but it should also fit RSP-320-24 and similar LRS models.
The attached PDF might help with the assembly. Printing half of it on a A4 paper will allow you to project the holes to your panel.
You can hide the SSR there and the through-hole for the bed cables thus hiding all AC inside the box.
Hardware BOM
| Item | Qty | Printable |
|---|---|---|
| AC Cover | 1 | Yes |
| PSU Clip | 4 | Yes |
| M5 x 12mm | 4 | No |
| M4 x 8mm | 4 | No |
| M3 x 12mm (slightly longer will also fit) | 6 | No |
| M3 x D4.6 x L4.0 | 6 | No |
| IEC Socket | 1 | No |
| Zip ties | 3-6 | No |
Disclaimer, I'm not an electrician, I have no idea if this is safe. Be very careful when doing anything with or around AC wiring.