Camera Lens Cap Holder (49-82mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable lens cap holder for tripod screw.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I needed a place to store the cap whilst shooting and didn't find an adjustable solution so I made my own.
It's attached using a 1/4 UNC screw and adjustable to fit lens caps (or filters) from 49-82mm.
When adjusting the screw needs to be loosened a bit, it only takes seconds with no tools.
Rotate the holder to make it loose and the rotate screw by hand. Do the same in reverse to tighten it, with a little practise it just takes a few seconds to adjust to a new lens cap.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6