Fox 40 Volume Spacer 5cc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Half sized volume spacer for a fox 40 fork
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
NOW OBSELETE DUE TO A RECENT POST OF MINE
keeping this here anyway
Half size volume spacer for the fox 40 fork. Made this almost two years ago. Proven in the world cup on the bikes of numerous riders. Give it a try if you really like to dial in your bike setup
PRINT SETTINGS
The smaller your layers, the better, print hot and 100% infill to eliminate any empty space in the part. this is going to take high amounts of pressure.
Any plastic should work fine. i tested PLA and PETG mostly. no deterioration in suspension oil when left completely saturated for almost a year.
for best results, use soluble supports if possible. I used breakaway supports, make the support shape concentric so you can pull the supports out in one yank.