2020 Extrusion V-Slot LED Light System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted design from 2020 V-Slot by Coat to make 'cover' and extend outside of the extrusions and make a light system…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 2996
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Adapted design from 2020 V-Slot by Coat to make 'cover' and extend outside of the extrusions and make a light system possible by simply slotting into the extrusion.
Can be installed facing downward (then it has room for 5 standard LED strips side by side) or on top of the extrusion and fit 1 LED strip at the front 1 at the back.
If you wish to have a wider version made please give me a shout, I made it as thin as possible to reduce filament use.
The unit is 100mm long but can easily be scaled to be as long as needed.
Print instructions
Category: 3D Printer Accessories