68mm XeroWhoop 35mm props
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 68mm version of the original 75mm XeroWhoop with 35mm props. I found that the frame is substantially lighter…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 634
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a 68mm version of the original 75mm XeroWhoop with 35mm props.
I found that the frame is substantially lighter and flies much better than its 75mm counterpart.
There are 3 FC mounting options, on top of the Whoop Frame, at the bottom of the Whoop frame like NBD's 75mm frame and/or the bottom plate like a toothpick.
The canopy and Battery holders are recreations of Angry_Don and FPV_Skittles' work respectively.
Print Canopy, Battery Holders and FC Soft Mounts in TPU.
I've printed the frame in PLA, PETG, SBS and ABS. I have broken a few PLA frames but the SBS and PETG frames are still holding up, I do prefer the SBS as it's the lightest filament and takes impacts well. I haven't tested the ABS frame. I'm sure everyone will have a suggestion for a better filament.
Print the frame with a random Z seam alignment as the whoops tend to brake on the seam.
I use a brim for bed adhesion purposes.
Category: R/C Vehicles