68mm XeroWhoop 35mm props
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 68mm version of the original 75mm XeroWhoop with 35mm props. I found that the frame is substantially lighter…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 61
- Makes
- 0
- Views
- 634
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is a 68mm version of the original 75mm XeroWhoop with 35mm props.
I found that the frame is substantially lighter and flies much better than its 75mm counterpart.
There are 3 FC mounting options, on top of the Whoop Frame, at the bottom of the Whoop frame like NBD's 75mm frame and/or the bottom plate like a toothpick.
The canopy and Battery holders are recreations of Angry_Don and FPV_Skittles' work respectively.
Print Canopy, Battery Holders and FC Soft Mounts in TPU.
I've printed the frame in PLA, PETG, SBS and ABS. I have broken a few PLA frames but the SBS and PETG frames are still holding up, I do prefer the SBS as it's the lightest filament and takes impacts well. I haven't tested the ABS frame. I'm sure everyone will have a suggestion for a better filament.
Print the frame with a random Z seam alignment as the whoops tend to brake on the seam.
I use a brim for bed adhesion purposes.
Category: R/C Vehicles