Counting matching models…
As tough as the Mobula 8 is, it won't probably survive throwing it into a backpack to take it with you. This case allows you to do exactly that, while also protecting your whoop from some rain or mud. Fits analog or Walksnial 1s Mobula 8…
Print approx. €10.19–€12.45 excl. taxPreliminary estimate for PETGSource material: PET
Replacement frame for mobula8. This frame is not bulletproof, but should take decent hits without braking instantly. I've made few modifications to stiffen up the frame. Weight is around 17g (original 11g), so sligthly heavier than…
Remix for woodprop's mobula 7 case from thingyverse (https://tinyurl.com/2pue85ds), used 5x3mm magnets and filament piece for hinge. used velcro to attach batteries to top of the case.
I really like the case, but it was not finished without a nice gasket seal, so I made one. Makes a good seal and helps keep the lid closed by adding a little resistance. Printed in Mango Hatchbox TPU.
As tough as the Mobula 8 is, it won't probably survive throwing it into a backpack to take it with you. This case allows you to do exactly that, while also protecting your whoop from some rain or mud. Fits analog or Walksnial 1s Mobula 8…
Print approx. €10.19–€12.45 excl. taxPreliminary estimate for PETGSource material: PET
After 2 broken frame on my Vision40 (a 1s whoop using the Mobula7 V4 frame), I wanted to try switching to, what I hope will be, the more durable V3 frame. As that frame was designed to accept 2S batteries, I designed this adapter block to…
Just another 1S holder. It is important to print it from Flex. I have tested 98a from Fillamentum, It works great with one perimeter and 13% infill. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
A 3D-printed IKEA Skadis mount for the Mobula 6 FPV drone would be a compact and functional holder designed to securely store and display the small quadcopter on the popular Skadis pegboard. The mount should feature a custom-fit cradle or…
Mobula 7 Battery Shim for when using a battery that's too thin like the WeBleedFPV folded 450mAH batteries or 300mAH batteries Print flat on the bed with supports (see pics). 100% infill Category: R/C Vehicles
Remix for woodprop's mobula 7 case from thingyverse (https://tinyurl.com/2pue85ds), used 5x3mm magnets and filament piece for hinge. used velcro to attach batteries to top of the case.
A carrying case for the Mobula 8 drone. I wanted a carrying case that didn't take up too much space, but was sturdy and secure enough that I wouldn't have to worry about having my drone inside, with foam to absorb any shocks. I used the…
The mobula 8 is a good drone, but its battery attachment system is far too limiting. To increase the choice of drone batteries that can be used with the mobula 8, we need to make a few adaptations. I've designed a very simple and flexible…
Printed in PET-G this weights about 2g The 5.8Ghz antenna can be wedged in between the camera and the leading edge of the mount RunCam Night Eagle 3 at AliExpress: https://a.aliexpress.com/_EHhsPGd
Description This is a box for carrying the mobigital7 (mobula7 HD with vista naked). I set it up for the size of the mobigital7 with vista naked and frame mobula7 V3 with stock battery holder. You'll find the files in STL and STEP if you…
Canopy para tiny whoop Mobula 6 en filamento flexible TPU en diferentes diseños con orejas, tiburón y simple. Especificaciones: Para imprimir de manera adecuada el filamento flexible TPU, se recomienda usar una impresora 3D de extrusor…
Simple pressfit TPU lens protector to take some of the damage for camera. Inner diameter 12mm Weight is only under a gram, even with 100% infill TPU filament recommended
The Walksnail Moonlight Mount is a -designed holder for attaching the Walksnail Moonlight Kit camera to the Mobula 8 O3 drone. This mount ensures a secure fit and optimal camera placement for smooth, stable FPV footage during flights. ✅…
Simple case for the Mobula 7 drone. The case holds the drone, 4 batteries and spare propellers. The lid and clip are simply snapped together, no gluing is required.
Bone-style long-facing frame for Mobula 7 whoop, will require motor direction correction in Betaflight, uses only standard Mobula 7 hardware and 1 rubber band (for holding the battery). Build like standard Mobula 7, but with flipped props…
Uses Phoenix-Prints' design: https://makerworld.com/en/models/938312#profileId-903531 Needs a lot of supports, organic are not too annoying to remove. Version on pictures is 30 degrees. UPD: I've been using it almost daily for months now…
Remix of Krhom's first O4 mount. No supports needed, printed in TPU 95A, works with the OEM self-tapping screws, maintains some camera tilt options. You do need to trim the canopy arms around the USB-C and the Digital port so they're not…
This part is intended to be used mount 2x1S batteries to a Happymodel Mobula 7 v2 frame. Parts should be printed using TPU/Flex (Sainsmart used) with 100% infill.
tested and works great! I just added a higher angle version….
This is a remix for the walksnail version of the mobula 8. https://makerworld.com/en/models/689978#profileId-618749
STL found on Happymodel's website for Mobula 6 Freestyle HD Zero. I figured this might be useful for other builds too! Will also be uploading a remix of it in a 90 degree angle version I hacked together.
This adapter is used to mount the LiHv 450 mAh battery (I used these ones ) on the Mobula 6 Freestyle HD . Design to be printed using PLA or any stiff non-flexible filament (DON'T use TPU). Simply flex the original battery compartment on…
Designed for the mobula 7. A quick ~10 minute print to make your tinywhoop drone more stylish. Print with 5 or more edge loops at 0 distance from the model. 15% infill, no supports, PLA. License -…
This is a O4 canopy for Mobula 8. Recommended printing with TPU 68D filament (I printed with TPU for AMS). I recommend setting 100% infill and using tree supports. When printed with PLA and subjected to a crash, it breaks (tested). Allows…
A case for 75mm tiny whoops like the mobula 7. Print instructions Category: Robotics
My friend crashed his Mobual 8 drone that had been factory fitted with the DJI 03 Air Unit. When he brought it to me for repair I found that the “factory” build had allowed the Air Unit to Flight Controller wires to move into the path of…
I really like the case, but it was not finished without a nice gasket seal, so I made one. Makes a good seal and helps keep the lid closed by adding a little resistance. Printed in Mango Hatchbox TPU.
1mm wall thickness It is recommended to print in resin but should also work fine in FDM. Suitable for Happymodel Ant camera (14 mm wide). Mount hole size: 25.5mm*25.5mm
This is conversion frame mobula 8 to 3 inch toothpick
1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…
tpu 50%infill - weight with 04lite = 21g. 0.2mm layer height organic supports should fit original 04 lite camera faceplate & and axis flying 14mm camera housing. install your camera first and run a small zip tie through the spaces at the…
Rugged box for your Mobula7 tinywhoop Print 1x lid, 1x base, 2x latches, 6x screws. All in PETG, although PLA would work but it would be less durable. I added custom foam inserts cut from an sport mat, to fit the drone perfectly : One…
I've created this model so I could quickly snap it onto my mobula7 1s in the field without any tools or modifications to the frame or the FC. Printed mine with 95A TPU. It needs to be flexible in order to snap on the frame so PLA won't…
Improved previous concept, made it lighter and made a lot of small improvements. It is meant to replace the mobula7 frame, but can probably replace most crazybees of this size. It is intentionally multi-part to enable two different kind…
Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…
TPU filament 1x M2 x 20mm Screw 1x M2 Nut The camera housing can be printed without support. The side where the lens is, has to be flat on the print Bed. After printing, you need to cut it with scissors. See the picture for reference. To…
Based on a Viking helmet model originally shared on Autodesk’s community platform, licensed under CC BY-NC-SA. Modified and adapted as a Tiny Whoop canopy. All credit to the original designer and Autodesk. Not for commercial use.
Frame Mobula6 remixed model My Mobula6 65mm frame copy. I've not original frame and not tested model (waiting parts for my first TinyWhoop). If you want print frame give feedback please so that i could change. (I'm just learning)…
Designed for Tattu 550mAH LI-HV batteries to be mounted on mobula 6. Print settings used: 0.25mm structural preset, no supports, 100% infill, PETG for Basket and Battery Holder, TPU used for battery strap file. Print 2 of the battery…
Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.
A canopy to mount O4 lite on Mobula 8 frame. Print with hare 70 D (or harder) TPU, 15% infill, 3 wall loops all the way. Airunit is mounted hanging downwards, with a set of M2 bolts / nuts. With two fresh BebtaFPV's 550mAh batteries, I…
A canopy to mount O4 lite on Mobula 8 frame. Print with hare 70 D (or harder) TPU, 15% infill, 3 wall loops all the way. Airunit is mounted hanging downwards, with a set of M2 bolts without nuts - screwing directly into the TPU. With two…
to fit on a Mobula 8 with a cnhl ministar battery( I use a 2way tape thats thin to help with keeping friction up
Just a simple O4 Lite canopy for the Mobula 8 I was tinkering with — attached it using some zip ties.
Small vertical case for Mobula7 1S 75mm Micro FPV whoop drone (99mm*99mm*40mm) and 6 1S LiPo batteries. Material: PLA Layer height: 0.2 mm Additions: No Infill: 15 % Supports: No Temp., nozzle: 210 C Temp., bed: 60 C Cooling: 100 %Small…
Got bored from duck taping the original frame after every hit to a wall. This is durable, but you should order more props ;-) New PID tune is required, in general, lower the P-gain for 10-15%. Print instructions This is 105mm frame for…
Originally, I had ziptied the buzzer to the red TPU canopy cover in my mob8, but it was't ideal so I came up with a 3d printed holder. It's press fit and the inner hole has 11.8mm clearance, so feel free to resize it in slicer if yours…
After 2 broken frame on my Vision40 (a 1s whoop using the Mobula7 V4 frame), I wanted to try switching to, what I hope will be, the more durable V3 frame. As that frame was designed to accept 2S batteries, I designed this adapter block to…
Hi! Here is a mobula 6 HD lightweight canopy, roughly inspired by the Slim Whoop Camera Mount (Adjustable Angle) by MrShutterBug. You'll have to remove the open square shaped part on the camera and re-use its two screws to avoid camera…
Description This is a small two-part TPU adapter that lets you use the BETAFPV Micro Canopy for HD Camera on the Happymodel Mobula8 frame. The canopy was originally meant for the old Meteor85 frame (which is no longer available), but it…
The Mobula6's battery protrudes on the bottom, so the TinyWhoop can't be situated exactly parallel to an even surface. So I quickly made this dead-simple holder which the 65mm drone fits snugly on top of - perfectly horizontal and ready…
Here's a 3d printable sculpt of a remora hiding in a manta ray's everything hole, just like what's described in this article . Print and Assembly Instructions Manta Ray Requires 5mm diameter round magnets that stack up to: 3mm each for…
Frame modified for mobula6 hd and its runcam split 3 lite board. Category: R/C Vehicles
*EDIT 08/2026 - TPU 95A works also, PETG lasted about 20 packs* Lightweight adapter to fit caddxfpv ant camera for Happymodel mobula6 2024 tinywhoop. Stock fc screws to mount it to the canopy, and M2 bolts for the ant camera PETG…
*EDIT 08/2026 - TPU 95A works also, PETG lasted about 20 packs* Lightweight adapter to fit caddxfpv ant camera for Happymodel mobula6 2024 tinywhoop. Stock fc screws to mount it to the canopy, and M2 bolts for the ant camera PETG…
This frame can be used with Mobula 7 parts. Canopy and batterystrap needs to printed in flex filement. Print Settings Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: does'nt matter PLA Category: R/C Vehicles
Remixed the mobula 7 canopy to fit my caddx ND filter onto the Turtle 2 - snug fit for the lens, so it holds the lens (which was a bit loose for me) perfect in place. Also protects all wires perfectly. On the picture you see the 1/2…
This is a remix of robomaniacs Adapter. This one is more rigid and easier to print. Just lay it flat on a side and print it. Your printer should be capable of printing a 10mm TPU bridge without any problem. Print Settings Printer Brand:…
Quick base I drew for the Mobula 7 HD, though I think it should fit the Mobula 7 as well (as long as they have the same frame). It has 2 different positions, one in an angle and another one flat. The connector fits really snug with the…
UPDATE : I have removed files from the downloads for now, working on a new version with integrated battery holder and a better system for attaching the FC. At this stage it requires very tight tolerances and a well tuned printer.(~0.1mm)…
My Camera screws came loose while flying so the washers went missing and then I lost one of the washers to the VTX board while I was swapping it out with a AXII Micro. Then I remembered I bought this 3D printer for some reason. So i…
Update New design - print with supports :-) Simple stand for Mobula 6 with slots for batteries and USB charger from original package. Battery hole dimension (Length x Width x Depth): 12,5 x 6,5 x 8 mm. Note: I miscalculated when designing…
So everyone knows about the jello caused by the stock Mobula 6 Canopy but I like how light it is. This was my attempt to fix the issue with minimal effort and it seems to have been a great success. The Support Clip snaps in place on the…
Simple cover for USB 1S charger. There are also holes for two LEDs and a switch. It also fit in stand, which you can download here: https://www.printables.com/cs/model/238194-mobula-6-stand Other FPV stuff: Alien 5" GoPro mount Alien 5"…
I remixed the moblite canopy to use a front screw so it would be compatible with a full size flight controller. The angle is about 30 degrees using the last hole. Category: R/C Vehicles
I got tired of burning mosfets on the crazybee flight controller for my Mobula7HD (yes, I used the 9000kV motors, yes I had the capacitor on the battery), but I didn't want to give up on the dream of flying 3S. So I replaced the flight…
Heavily inspired by something I've found on thingiverse, which I can't anymore, so no attribution. (OG author, shout if you see this!) I tend to use a rubber band over the battery for extra secure fit. Print in TPU.
Same dimensions as the one on the mobula6 Category: R/C Vehicles
I was annoyed as I kept hitting the ground with the bottom of the drone. I made these small, light and efficient legs which work with original screws. My quad now weighs 37g with the battery and with the stock battery (250mah) I have the…
Bought some batteries that were mislabeled in the specs and they were too big to fit into the regular tray. Customer service gave no response so I figured I would try to make it work. The batteries fit snugly into clip (tighter than the…
A mount designed to hold the Mobula7 (and other Mobula models) on the IKEA Skadis pegboard. It uses the universal hook system.
Spacers for Happymodel Mobula7 FPV drone. In the model I got, it seems like the flight controller can move up and down way to far (up to 3mm). If it moves up or is pushed up (i.e. when plugging in USB), the FC then touches the…
I designed this new canopy for Mobula 6 to solve some problems: It has support for copper antenna on the rear. Upgrade recommended for yours. Support for a small 9mm buzzer. As it is very small, a buzzer is useful to locate it if it falls…
I remixed a battery holder for the tinywhoop drone Mobula 7 1S from Happymodel. With my model you can carry a 500mAh Tattu 1S and the model will be below 2g. I printed with 0.24mm layer height using Red PLA+ from CC3D
This is a buzzer mount for Tiny Whoop AIOs (28.5x28.5mm) designed to tidy up the buzzer installation under the canopy. The design has been optimized to be printed with TPU and to be very light. Print Settings Printer Brand: Creality…
printable without supports. may need to re-drill the circuit board mounting screw holes, as they are only 1mm diameter. The STP file contains separate sub objects which are not joined to each other. you will need to perform a Boolean…
I liked the original design a lot, but I prefered to have a case where I can put all my things in... So I created that remix. It will have enough space to fit a small BetaFPV Lipo Checker... of course you can use it for sth. else too,…
Just a simple addon to Mobula 7. No need for rubber bands. UPGRADE: Added spare wire holder. Category: R/C Vehicles
I designed this thing to fly 1s300 packs on a Happymodel Mobula 7 frame. It has a good friction fit on the battery, similar to a mobula6/meteor65. It snaps in place so you can keep it in several packs in a row, and pop it out easily when…
