1 / 1
Mobula 6 Battery Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to allow for larger (550 mAH, 15mm by 7mm) batteries to be mounted on the quad. Roughly 2 to 3 grams total.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Designed for Tattu 550mAH LI-HV batteries to be mounted on mobula 6.
Print settings used:
0.25mm structural preset, no supports, 100% infill, PETG for Basket and Battery Holder, TPU used for battery strap file.
Print 2 of the battery strap file and slide them onto the battery holder then slide onto basket. Use 2 M2 screws to hold the battery holder in place. May need a longer battery lead connector to get battery centered