Balance Connector Caps - JST-XH
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are protector caps for the common JST-XH balance connectors used on Lipo batteries. These are designed a bit…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 98
- Wydruki
- 3
- Wyświetlenia
- 778
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
These are protector caps for the common JST-XH balance connectors used on Lipo batteries. These are designed a bit shallow intentionally so that the connector can't be pushed entirely on flush. This allows the connector to be removed easier. This is a work in progress, unfortunately, these connectors do not have a lot of places to hook on to, so I am relying on an interference fit. This means the tolerances of the print have to be pretty good. In other-words,these might be hard to print and get a good fit. You might have to play with scaling. I have been able to get really good results as is with my solidoodle 4 printing at .3mm @ 40% infill. Please report your results,
Category: R/C Vehicles