6-bolt disc rotor shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sometimes you run out of horizontal (driveside to non-driveside) travel on the slots on disc brake calipers - be they…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Sometimes you run out of horizontal (driveside to non-driveside) travel on the slots on disc brake calipers - be they flat or post mount.
If you're fortunate, you move the whole rotor outboard (to the non-driveside) through the use of spacers.
Syntace sells a kit of 8 spacers at 0.2 mm thickness.
I haven't tested these, but I thought it was a neat idea.
With the IPT file, you can make any thickness you need.
Rev 2
Solidworks
M5 normal clearance hole size
STL is 1 mm thick
PCD, OD, & ID taken from SP dynamo hub drawing or measured on SP dynamo hub

