6-bolt disc rotor shim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sometimes you run out of horizontal (driveside to non-driveside) travel on the slots on disc brake calipers - be they…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 128
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Sometimes you run out of horizontal (driveside to non-driveside) travel on the slots on disc brake calipers - be they flat or post mount.
If you're fortunate, you move the whole rotor outboard (to the non-driveside) through the use of spacers.
Syntace sells a kit of 8 spacers at 0.2 mm thickness.
I haven't tested these, but I thought it was a neat idea.
With the IPT file, you can make any thickness you need.
Rev 2
Solidworks
M5 normal clearance hole size
STL is 1 mm thick
PCD, OD, & ID taken from SP dynamo hub drawing or measured on SP dynamo hub

