1 / 13
Sharkie Universal Calibration Tower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal calibration tower stylized on shark fish :) Updates: Released v1.8, exactly the same as v1.7 except for no…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Universal calibration tower stylized on shark fish :)
Updates:
- Released v1.8, exactly the same as v1.7 except for no 'B 5' embossed text on the side.
I'd love to see your make - please publish :) Consider a tip if you like my work :)
Can be user to test/calibrate:
- Overhang on straight and curved walls (jaws and tail 50/60/70 deg)
- Retraction / stringing
- Bridging on straight and curved area (inside top)
- Cooling (cone inside jaws)
- Filling flat and curved surfaces (inside bottom, jaws)
- Dimension accuracy (eyes - 2 mm, column - 4 mm, tail - 0.8/1.6 mm)
- Ringing (indented letters on the side)
- Sharp edges (side jaws)
Designed in 10 mm segments and optimized for printing at 0.2 mm.
Single sharks after all could be used as toys for children :)
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Category: 3D Printing Tests