E3D v6 CFD optimized fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan duct for E3D v6 with CFD optimized air flow around heatsink and heatbreak to increase cooling surface and decrease…
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 532
- Wydruki
- 1
- Wyświetlenia
- 2393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fan duct for E3D v6 with CFD optimized air flow around heatsink and heatbreak to increase cooling surface and decrease resistance for fan.
STEP file included.
For the best strength print clip in original horizontal orientation - requires support.
Alternatively print with face (fan side) down - no supports.
Print with PET-G or ABS and 0.2 mm layer height.
Mount on heatsink and tighten with M3 30mm bolt or two zip ties.
Full cooling part set for E3D v6 is available here: https://www.thingiverse.com/thing:3590464
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament: Any PET-G, ABS Any
Category: 3D Printer Parts