T-nut M3 drop-in rotating V-Slot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted for M3…
- Ocena
- 4,9 / 5
- Polubienia
- 582
- Pobrania
- 3092
- Wydruki
- 55
- Wyświetlenia
- 7465
- Oceny
- 40
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
T-nut for 20x20 or 20x40 V-Slot aluminum extrusion (6 mm gap) compliant with original metal T-nut but adopted forM3 nut.
There's also a version that fits to #4-40 x 3/16'' nut: https://www.thingiverse.com/thing:3366563
Fits for most of the printers based on V-Slot, e.g. Creality (CR-10, Ender 3, Ender 5), Tevo (Tarantula, Tornado), Tronxy (X1, X3, X5S) and many more
Put it in the profile slot and turn the bolt - it will turn and find its locking position.
Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs
A decent set of M3 hex bolts and nuts can be found on Banggood: https://www.banggood.com/custlink/KG3vEvGOIp
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Any PETG/ABS Any
Notes:
Print very slow around 10 mm/s with a little (if single nut) or no cooling (batch) ideally with PETG or ABS, as those are not so brittle as PLA.
For best results and strength set in Cura:Top Layers: 1000
Bottom Layers: 0
Top/Bottom Pattern: Concentric
Category: 3D Printer Parts