Jaw Inserts for bench vice[vise] YORK 80
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jaw Inserts for bench vice YORK 80 I designed and created jaw inserts (for bench vice YORK 80) type: C (centering)…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 1686
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Jaw Inserts for bench vice YORK 80
I designed and created jaw inserts (for bench vice YORK 80) type:
- C (centering) size 1
- C (centering) size 2
- F (flat)
S (special for screw ISO4762)
perfect fit
- you can use different combination of inserts type as you need
(for example instead standard C-L + C-R you combinate C-L + F, C-L + C-L)
printed parts, material PETG:
[layer height=0,2mm][Infill=100% Rectilinear][vertical shells perimeters=3]
Pos-001_Jaw Insert C-L_YORK80 (size1)
Pos-002_Jaw Insert C-R_YORK80 (size1)
Pos-001_Jaw Insert C-L_v2_YORK80 (size2)
Pos-002_Jaw Insert C-R_v2_YORK80 (size2)
Pos-003_Jaw Insert F_YORK80
Pos-004_Jaw Insert S-L_YORK80
Pos-005_Jaw Insert S-R_YORK80
Version universal
universal version not dependent of vice producer and size of vice
If you don't have vice YORK 80 you can use Universal version:
"https://www.prusaprinters.org/prints/2452-jaw-inserts-for-bench-vicevise-universal-version"
Print instructions
Slic3r Prusa Edition settings:
0,20mm QUALITY MK3
Prusament PETG
Original Prusa i3 MK3S
layer height = 0.2mm
vertical shells perimeters = 3
Infill=100% Rectilinear
printing time:
2h 26min [Pos 001+002]
2h 19min [Pos 003+003]
3h 12min [Pos 004+005]