MKS Canable Din Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount the MKS CANable (not pro) to a din rail like those found on Voron printers
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is ONLY for the MKS produced CANable which does not follow the same spacing as the official non pro version. I've included the Voron din rail clip although any other clip with 31.5mm spacing should work.
BOM:
2x M2x10 self tapping screws
1x MKS CANable
1x zip tie
Print both parts using strong print settings, I used the general Voron parts recommendations. Use the two screws to attach the two parts together, orientation doesn't matter. Slip a zip tie through the space between the two parts and tighten lightly around the module.