MKS Canable Din Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount the MKS CANable (not pro) to a din rail like those found on Voron printers
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 75
- Makes
- 0
- Views
- 639
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
This is ONLY for the MKS produced CANable which does not follow the same spacing as the official non pro version. I've included the Voron din rail clip although any other clip with 31.5mm spacing should work.
BOM:
2x M2x10 self tapping screws
1x MKS CANable
1x zip tie
Print both parts using strong print settings, I used the general Voron parts recommendations. Use the two screws to attach the two parts together, orientation doesn't matter. Slip a zip tie through the space between the two parts and tighten lightly around the module.