MP5k Front Sight for Galaxy/Tokyo Marui/CYMA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 1114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Update (11/25/18): Added threads for the outer barrel to screw into.
Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k
Will NOT fit standard MP5
Plan on making a removable sight indicator for this part if it happens to get shot off.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
10% At Least
Post-Printing
Removing Old Sight
Get any old hex key set and remove the grub screw in the center of the sight post
Removing Outer Barrel/Thread Adapter
Use the smallest hex key you have, remove this grub screw at the bottom of the post. Then proceed to unscrew the outer barrel out.
Preparing Part for Installation
Now, slowly use the old grub screws and outer barrel to make the new threads out of the preexisting holes on the part. Take time to ensure that you're threading it straight. Once it feels hard to keep turning, unscrew it a few turns before continuing to cut threads.
Note: Drill out the hole meant for the grub screw holding the outer barrel in place. CAD wouldn't allow the hole I put go through the thread shape for some reason.Installing New Front Post
Work backwards from when disassembling and you're done!
Please do not overtighten.
Category: Sport & Outdoors