Liczymy pasujące modele…
Holster for AEP CYMA Glock CM.030 Mount for Molle or 50mm belt Used material screw: - M4x14 DIN 7985 - M4x8 DIN 7985 - 2x NUT M4 DIN 934 - 2x M3x10 DIN 913 - spring from pen diameter 4mm I recomend to use ziptie to belt mount like on…
PDW conversion kit for cyma cm030 (glock 18c) with retractable stock. I used a 8.5mm fenolite tube as stock tubes, but you can use metal rods. Just remember to make slots for the catch lock the stock. The assembly uses a few M3 screws and…
I was recently inspired by glgr with his curved magazine creation https://www.printables.com/model/938167-mp5-curved-airsoft-magazine-fits-mosquito) and saw there was not a 3D printed straight magazine for the Mosquito Open Beta 2, so in…
u need to buy a 30x8x0.5mm spring kupple of bolts and nuts in m4 and m5 and superglue and a 8mm aluminium rod
Summary The ST-AR15 Upper & Lowwer for CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
Cyma Glock 18C Tac Rail and 14mm CCW Barrel
This is a very simple MOCK airsoft suppressor i designed for very specific reasons. i have a cyma standard ak 105 carbine. CYMA Standard Stamped Metal AK-105 Airsoft AEG Rifle with Synthetic Folding Stock (Package: Gun Only), Airsoft…
Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k Will NOT fit standard MP5 Plan on making a removable sight indicator for this part if it happens to get shot…
Update 2025-10-14: Removed the remix link to glgr's Curved MP5 magazine . My mag has grown different in every way and is no longer based on his mag design. A remix link no longer made sense. Fitment is based on Cyma's metal-shell AEG…
Updated on 11/7/19, scroll down to that for better information! I downloaded an existing M14 EBR model from an upload on sketchup. Original model credit to Rabid Beagles there. https://3dwarehouse.sketchup.com/by/wujoberto Then I used…
The ST-AR15 MOD3 Rail(SP-BAR) For CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
The ST-AR15 Rail For CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased operations, we have…
All the pictures of the printed parts are of an older verion. The files have been slightly. Biggest differences to the pictures are in the upper part of the frontgrip (nicer transition from grip to body) and an additional tool compartment…
Just made a improved version of the default motor cover for a airsoft cm030 cyma g18c electric pistol. Made with a loop for secure the pistol and a cover to avoid dropping the magazine during the game.
This is a simple 14mm CCW thread adapter for the Cyma CM.127 AEP. The CM.127 has a glued piece of plastic at the end of the barrel where a 14mm CCW thread “should've” been. As such, I modeled this thread adapter with an extra cover piece…
V2 is a stronger version with 4 slots instead of 2 large ones. It can also be printed without supports.
AEP Glock 18 CYMA CM030 gearbox cover Print settings: 0.2mm layer 4 walls Organic tree support 25° Place it to flat side down on bed
This is a Pouch Insert for Standard Magazine Pouches to fit two Cyma CM.125 USP Magazines. It is designed to sit very tight in the pouch. May fit other magazines as well, the slots are designed to be 9,8mm wide, my magazines have a width…
This is a simple magplate that i made for my Mp5 mags to make it easier to grab while in the heat of the moment. I have also included a version without the handle if you just want to replace the normal one. For printing i would not…
Replacement Magazine Catch Lever for CYMA MP5 Insert pin into lever and super glue it. (might need a little bit of post processing to fit in perfectly) Nozzle: 0.4mm or smaller Layer height: 0.10mm Infill: 100% Supports: no Material:…
Tool to unload your mag. Save money for unused BBs. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0,28 Infill: 20 Post-Printing Tool Tool with short mag Tool with long mag Category: Sport &…
The “Cyma_CM127_Magazine_Holder” can be screwed to anything with M3 threads and 10mm spacing. For example to the included “Cyma_CM127_Magazine_Holder_Belt_Clip” or my “ Cyma CM 127 Carbine Conversion/ Rony ”. The magazines will be…
This is a handguard for MP5 CYMA model inspired by MP5K and Romanian grips. Huge thanks to @michalgerhat for creating a basic handguard that i used as my canva and to https://makerworld.com/en/@SJHCreate that created the foregrip. All i…
Simple copy of the original hop up arm for cyma AEPs. This should work for all cyma AEPs. I tried it on the cm.030 and cm.126 but basically all cyma AEPs use the same hopup unit to my knowledge. With PETG they bend to one side when…
The same as my M4 / AR15 STANAG Magazine Stand I wanted a little stand for the small magazines for my Cyma CM.030 AEP. I made a 1 through 3 mag version available seeing as that it's a sidearm you probably will not use more then 3 mags. If…
If you are making an R-Hop for your Cyma CM.030 (Glock 18C) and you would like to keep your original hop up arm intact, or if for whatever reason you would need a replacement part, this is the model you are looking for. Use first a 1.3…
Hello, Today I have an Airsoft Mp5 muzzle brake for you. This is the version for the Mp5 Cyma submachine gun. It is a compensator for the end of the barrel. It fits very nicely and is completely complete. At the end of the compensator…
Change your front rails with something more compfortable and achieve a high grip position. I have made these Thumbrests for right-handed and even for wrong-handed use ;P If you want, you can put some lettering on the Nametags. Compatiple…
Replacement charging handle for CYMA MP5k v1 is smaller size (smaller chance to break) v2 is normal-ish size Size of a pin hole is kinda small to fit in metal pin, but i only made it there as a reference. I recommend printing it in size…
Replacement charging handle for TM and CYMA brands of M14. Non-articulated, meaning you should not slide the handle, which is pointless for this model of airsoft as it serves no purpose in its operation. Print Settings Printer Brand:…
This is an AK105 style front sight for the older AKM Cyma CM036. It may fit other Cyma AKs (or other brands) if they have the same screw attachment system. You will need the original screw (or the same) to attach the front sight under the…
A quick modification to the provided selector plate to be compatible with the cyma ak gearbox that comes with a mosfet. Installs in the same way as the original Mosquito selector plate. Allows semi/full-auto with the cyma ak upgraded…
Safety lever for Cyma CM.M702. This safety may be compatible with other airsoft weapons like Cyma CM.701 etc. But I haven't tested that. I would suggest you print this model with something more robust than PLA but you can try and let…
mounting a collimator, flashlight, or both simultaneously on an Airsoft Glock from Cyma. PETG, 0,3mm 5 or more perimetters montáž kolimátoru, baterky nebo obojího současně na Airsoft Glock od Cyma. PETG, 0,3mm, 5 nebo více perimetrů
Magpulls for Cyma series cm.030 and similar - sometimes those mags can be tricy to get out of the replica or the pouch. Mounted with two flat head m3 screws so its not going anywhere. I printed them in ASA in bright yellow - makes them…
I recommend printing this with support where lines are going down and up. Ill upload a picture.
Сам печатал пластиком ABS 0,4 соплом с разглаживанием на всех верхних поверхностях, чуть подгонял по посадочному месту. Делал под оптоволокно 1.5мм, запаситесь сверлом по металлу на 1.5мм и тогда зайдет на ура. Я доп. посадил на космофен…
easy shotgun charging
Requires pins, many common things like toothpicks or filament should also work as pins.
This custom-designed 3D-printed stand is specifically made for the CYMA CM.125 Airsoft pistol. It not only provides a stable holder for the gun but also includes an integrated slot for a magazine, making it particularly practical and…
Hello, Today I have an Airsoft Mp5 cocking lever for you. This is the version for the Mp5 Cyma submachine gun. It is a cocking lever. It fits very nicely and is completely complete. You can either screw the lever or glue it. I used…
All the pictures of the printed parts are of an older verion. ---------------------------------------------------------------------------------------------------------------- Parts List: - 1pc M3x8 zylinder head screw - 1pc M3 thread…
Finally - third iteration of my CM700 Mag project :) Spare mag holder for Cyma CM.700 in the form of M40A5 mag. Edit 11.2021 -There is version 2 with cuts to take out magazine even easier to reload You just need to take out pin and remove…
Replacement charging spring holder for CYMA MP5k Try both versions to see what works best for you. :) (might need a little bit of post processing to fit in perfectly) Nozzle: 0.4mm or smaller Layer height: 0.10mm Infill: 100% Supports: no…
cyma mag holder perfect for the 30rd Magazine for CM.030/CM.122/CM.123/CM.126/CM.127/CM.132 if it to tight you can heat up e bit the top brig so it allows more flex on the holders use tree support and no need support on the bottom part ,…
This is a replacement for the Pin that makes the snap mechanism of the fire selelctor switch of the Cyma 125 (USP) possible. It is that thing that flew across your room, nowhere to be found, when you took out the fire selector unit out of…
I had issues with feeding and found the mag didnt fit that well so i just added a little padding on the back
The holes in the top of the shelf are for 5mm Led lights and the cavity is for the wires to set below the shelf. The poles make the height of the camera adjustable as to how close or far away it is and the speaker cavity is for a 4in sub…
I have not hand chance to reprint after some adjustments, so might need some filing for fitment
On the RPK CYMA CM.052, the bipod attachment to the barrel broke into several pieces. It is irreparable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare. So I recreated the part. My…
Material: I used ASA to make the box as robust as possible. PLA works fine though. Recommended settings: 0.20mm Balanced 15% infill
Схожи с оригиналом, в STEP формате под ваши проекты
Stands for the Benelli M4 airsoft shotgun, one of the stands has a hole for the logo to be glued in (the logo is for download as well). The part with the logo holds the magazine tube, the second part holds the stock. Both parts have space…
This is a simple and easy way to fix your barel plug of your uTrack24 Cymatic Audio device permanent to your device. The issue of it sliding out due to vibrations get avoided. RJ45 cable fits right beneath. Designed to fit a ruthex M3…
*fake gun* that one metal piece that the internal bolt is attached to is supposed to be put in the same place in the printed tube, its exactly the same as original buffer tube
Сам печатал пластиком ABS 0,4 соплом с разглаживанием на всех верхних поверхностях, чуть подгонял по посадочному месту. Делал под оптоволокно 1.5мм, запаситесь сверлом по металлу на 1.5мм и тогда зайдет на ура. Я доп. посадил на космофен…
Cyma cm132 has removable grip panels, yet I haven't seen anyone make custom 3d printed version of them. So, there they are, I've made a blank pair of panels I encourage you to customize yourself, and attached a version I customized for…
Stands for the Benelli M4 airsoft shotgun, one of the stands has a hole for the logo to be glued in (the logo is for download as well). The part with the logo holds the magazine tube, the second part holds the stock. Both parts have space…
I had issues with feeding and found the mag didnt fit that well so i just added a little padding on the back
I have not tested this print yet but it is based on the design of SgtMiningDrill. Apparently you need slightly longer screws (not sure the specifics). Includes 2 more slots than the original. The first photo is the original design. Link…
Holster for AEP CYMA Glock CM.030 Mount for Molle or 50mm belt Used material screw: - M4x14 DIN 7985 - M4x8 DIN 7985 - 2x NUT M4 DIN 934 - 2x M3x10 DIN 913 - spring from pen diameter 4mm I recomend to use ziptie to belt mount like on…
For CYMA CM.125/S Print "CYMA CM.125-S - Holster.stl" last with supports enabled. Pause printing at 60.2 mm (layer 301 with 0.2mm layer height), before the hole is blocked off. Insert and align “CYMA CM.125-S - Lock.stl”, push “CYMA…
Barrel Adapter for Cyma MP5J (CM023) Airsoft Electric Gun Rifle
Change your front rails with something more compfortable and achieve a high grip position. I have made these Thumbrests for right-handed and even for wrong-handed use ;P If you want, you can put some lettering on the Nametags. Compatiple…
Printed with a 0.4 nozzle with fiberlogy matte olive green asa.
On the RPK CYMA CM.052, the ring on the lower handguard retainer used to attach the strap broke into several pieces. It is unrepairable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare.…
On the RPK CYMA CM.052, the top of the front sight is thinner than on other AKs from the brand. This is unrepairable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare. Super glue works,…
To begin with, I frankly do not like the regular silencer on the P90. Therefore, I took the one I liked from the pistols, honestly, I could not find its name, so I looked for a rectangular silencer by description. I made it in the Compass…
Here is a stock with battery compartment for the old Cyma CM036 AKM. It may be suitable for other Cyma AKs (or other brands) if they have the same attachment system. I am attaching a photo so you can compare it with the attachment on your…
Максимальная копия оригинала, для правок в STEP формате, НЕ оптимизирован под печать.
Максимально схож с оригиналом, для правок в STEP формате
airsoft hopup extender for custom projects using CYMA hopup extenders Category: Hobby
a delay mechanism for the tappet cam of a cyma CM.028 AEG. Install if you are having feed issues due to increased fire rate (it increases the feed window). It is a very tight friction fit , so you must press it firmly into the slot.
Inspired of kihope's model which design stock for a different AK model. Two versions: A) (Recommended) print two parts and glue it, with filament joints. B) print solid model Note: Supports is nescessarry for both of versions.
Fittings (bands) to hold gas tube cover for CYMA AKSU. These are pretty tight-fitting. Category: Sport & Outdoors
