Fatshark lens cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
lense cover for your Fatshark FPV goggle
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice cover for your Fatshark FPV goggle, so you can put your antennas, battery and other stuff into the case and don't have to worry to scratch the optics.
Also this cover protects against sunlight.
As additional feature i added a micro-SD-Card Holder and cutouts if you use dioptric lenses
Versions:
- Protector
- Protector + microSD-Slot
- Protector + microSD-Slot + dioptric lenses
- Protector + dioptric lenses
Testet goggles:
- Fatshark Dominator HDO
- Fatshark Dominator HD's
- Fatshark Dominator's
Print Settings
Supports: Yes
Resolution: 0.2mm
Infill: 20%
Notes:
use a flexible Filament (i used SainSmart TPU)
I don't recomend PLA or ABS and co. because then the clip is not bending. So it does't fit or scratch your goggle!
Print-orientation: in a standing position like in the STL file