1 / 1
Panel Clips for DIY Chest Freezer Organizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tame your chest freezer with some simple DIY panels and these clips!
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 66
- Wydruki
- 5
- Wyświetlenia
- 1664
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 8)Remiksy (0)Kolekcje (57)Powiązane
I was frustrated with constantly digging around in my chest freezer so I decided to create cubbies to help with organization.
Steps to build your own chest freezer organizer:
- Figure out the dimensions you need for each panel in the cubby.
- Figure out what size of panel you need to cut out all those individual cubby panels from.
- I purchased a 96" x 48" panel and used a little over half of it.
- Purchase panel.
- The panel I bought from Home Depot was sold as “5.0 mm utility panel”.
- A 1/5" thick panel (like this) or a 3/16" thick panel should work well.
- It may be best to print one of these clips and take it to the home store to find a panel that fits it well.
- Cut out the various panels you need.
- Cut interlocking slits into panels that will overlap.
- This video demonstrates the required joint nicely.
- This doesn't require precision, its OK to be a little off or to have slits that are a bit too wide.
- Press on the clips to keep things in place and make the structure more firm.
- Lower into empty freezer and organize!
- You may need to thaw the freezer first to get things to fit if there's a lot of frost build up.