136 modeli
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
Introducing the ultimate hunt, the Slitherfang from Horizon Forbidden West! This machine is to scale with the official board game and stands on a 120mm base. It has been split into a few, more easily printed parts that come together…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [UPDATE Sept 13, 2024] I just got some feedback that this model fits the…
This model is compatible with the lego system.
Pokemon Scarlet's Slither Wing, now printable! Some warnings: this is my first time trying to fix up a model! When scaled small, the wings tend to slice with holes or badly placed retractions/seams, probably due to the wings being tapered…
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case! i included STP and STL-Files let me know what you think!…
If you do not want to unload the filament this model is perfect for you
Quantum physics double slit experiment Print instructions .20mm layer height 100% infill elephant foot compensation ON
I have always wondered if something that I had seen in simulations and animations could be made as a physical model that students could interact with and investigate. This model sweeps out a pattern made by two coherent waves as they…
I designed this Lego Special part. Gear Slit 4T for helicopter design. Very tight fit on the axle slot. As I would like to rotate the meshing gear while able to push up and down the adjacent gears. The conventional Screw Lego is not able…
Introduction The Single-Slit diffraction experiment is amazing ! “The Action Lab” has conducted the experiment using an crescent wrench with 2 razor blades and a laser pointer: This 3D model provides a magnetic holder for two razor blades…
I wanted more airflow for the Silica, so i added some more Slits in the container
How many times have you needed a thin strip of tape, tried cutting it with scissors, and been left with a sticky wad? This slitting tool lets you accurately set the desired width, and then precisely slits the tape while still on the roll.…
Load onto your favorite slicer, press “split to parts”, select the rectangular box and change its type to “negative volume”, and print!
I have a bunch of light switches that need to stay on (or off) all the time. Turning them on (or off) will cause issues. So I designed this cover, and gave you two options: one has a slit so you can use a small tool to slide the switch up…
===UPDATE February 7, 2024 Print Profile now available: HERE ===ORIGINAL POST Removed one of the tabs so that it can fit around existing cables. The Extended Tabs version has the bigger tabs for a more secure grip.
Mini monster I created using Copilot & Sketchy AI, based on Matt Mercer's description of some creatures named "Slither". Tree supports can get a bit tricky to remove, since there's some small parts involved (teeth and back). Be sure to…
Download Slithe/Reptilio STL for 3D printing Fanart from Thundercats. Term for FREE by CG Pyro. Download Reptilio from Cosmic Cats. This bust is part of a collection of Fanarts by the Digital Artist CG Pyro, a project created by a Fan for…
NOTE: The wings of the model are a bit thin and parts of it are not detected when being sliced. To counter this, reduce the line width of the outer wall down to 22mm. I'm not 100% sure this will fix this as I haven't printed this out yet…
I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
H Gate Shifter // remixed from Antonyart's H Gate Shifter // This specific H Gate Shifter can be used as an H Gate AS WELL as a Sequential Shifter with two (2) slits on either side for rubber bands. I'd recommend 25%+ infill with a…
This model is compatible with the lego system.
This model is compatible with the lego system.
Tato úložná krabička je perfektním řešením pro bezpečné uložení vašich zlatých slitků. Uchovejte své zlaté slitky bezpečně a stylově v této prémiové magnetické úložné krabičce. Úložný prostor s víkem pro 12 zlatých slitků Testováno…
Using this you can store SD card/SD card adapter or 2 micro SD cards inside the DS game card slot. Video for context:
I liked the idea of LoboCNC tape slitting tool though not as enthused with the elastic and nut jamming. So I added a inset for a 10mmx 3 mm magnet (to replace the elastic for return) as well as a 5mm thread for a 50mm screw (no nut…
MAZDA 2-3-CX5 - Seat Guide Adjuster Unit Protector - End Cover Plate - Cover slitta sedili anteriori Spare Part Number: KD45-88-091 02 - KD458809102 - #88167A Fits: CX-3, CX-5, CX-9, Mazda2, Mazda3, Mazda6 Resize to adjust dimension If…
Build your own double slit experiment using the 3d pieces here plus one sewing needle, four M3x5 screws, and a laser pointer. I used 0.1 mm for the holder and 0.2 mm for everything else and printed in PLA with no supports. Set up the…
This is the same as this- https://www.printables.com/model/1007864-hearing-aid-insertion-tool except except with 2 slits
The original lid is about 1.5mm too deep (front to back), so I've cut that much out of the middle of it and merged the resulting parts. It now fits perfectly.
My RepRapDiscount smart controller came with a slited potentiometer, so no knob available in Thingiverse was very useful to me. I quick design this piece and, after a few tweaks, it fitted perfectly. Category: 3D Printer Parts
Equipment to reproduce Young's double slit experiment. To obtain appreciable results, the separation of the slits must be in the order of 0.2 mm or thinner, beyond the possibility of FDM 3d printers that normally have a 0.4 mm nozzle…
Embrace elegance with this stunning 3D printable female figurine STL model that captures sophisticated style and graceful poise. This beautifully detailed statue showcases a woman in a chic dress with an alluring long slit, perfect for…
This is a storage box for standard Gutermann thread reels and matching bobbins, to help keep matching threads and bobbins safe & secure. It will hold ten reels of standard gutermann thread, and has space to hold a sewing machine bobbin of…
This is a release of love. Minisforum has a really fun and removable "push" grab lid. It's easily removable. I'm working on a project that requires the M.2 slot to have a PCIe Riser Card pop out of the machine and allow me to hook up a…
Today we see doctors, nurses, policemen, firemen, civil protection personnel, volunteers as the great heroes of the moment, forgetting that there were also yesterday and there will be also tomorrow, ready to help those in need, with no…
An inspiration coin (or pf2e hero point!) for tabletop RPGs inspired by a four leaf clover, with a textured storage tower and rolling slit. The lid closes with a press fit, but there is also space for a 8mm diameter 3mm thick magnet for a…
I needed to cut a slit in a length of soft tubing for a project. I wanted the cut to be straight, and not slice my fingers in the process. The slot will hold a single-edge utility razor blade. It's designed for a 0.3mm thick blade. After…
A Slithering Tracker. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
I discovered a video tutorial on YouTube that demonstrates the cord knitting process using this wheel. It's more comprehensive and easier to follow than a written explanation. I highly recommend watching it for a clearer understanding of…
This is a single slit device for teaching diffraction. The slid width is difficult to control with precision once the model passes through the slicing software. However, qualitative differences in diffraction patterns are easily visible…
Same functionality like the model of BuildX, but this cover can only be attached, when the slit is not used for a tie! In addition, this cover holds a little better as it has hooks in both sides of the slot. The model was created with…
I created this extremely simple print several years ago when I needed to look into my son's eye to inspect his intraoccqular lens (IOL) that had become dislocated. This items makes a mini maglite produce a very narrow beam that should…
Hi I'm gabriel, I was inspired by the other model, in fact I just modified if with some things to create a working rail for the ak74, normally ak74 doen't have rails but I really needed it, I hope you like it I made three different models…
I created an OpenSCAD skript to define a number of bolts (wooden plugs) in a circular arrangement. Those I use in my large robot figures for splitting the model and making assembly way more simple. I scale up my model to the desired size.…
The original desiccant container fits the back corner of the PolyMaker PolyDryer, but the slits / grilles were set at 2.0mm which were too big for the desiccants I have. Since the desiccants were spec to be at least 1.2mm, I've modified…
The model was built around a laser pointer that is 17mm in diameter and 113 mm in length. I have printed and tested the model and it works.
Close the slots on the left and right side of the enclosure, provided that the holes for the PTFE tubes are not broken out. You need the following parts to mount one cover: 1x M3 8 mm Allen screw 1x M3 nut The model is crated with FreeCAD…
i used tree suport and brim
I have designed this for my trailer because cables were being damaged from rubbing against the sharp metal of the chassis. I have added a slit because I wanted to keep the cable connected as it already is. Created in Autodesk Fusion,…
Slither - Grant Want's Some Action - 2006 3D printable model.
Just like the original, but with a slit compatible with M3 size screws! This was made to allow compatibility with the Honeycomb Storage Wall, but it should work practically everywhere. Modifications were made with the negative volume tool…
the model you see is 35% larger than its download models I recommend using hot glue or whatever bonds to the filament you prefer to use. NOTE: this model is outdated go to here for my improved version:…
A cat paw bookmark without the slit that goes over the page, for those who worry about damaging the page. Creality CR-PLA .20mm layer height (0.4mm Nozzle.) No brim/supports 0% infill
Straight through holes to make it easier to print, more rigid and easier to clean.
This is my take on Slithe from Thundercats. You may need to rescale this design to fit your needs.
This simple model is a 2mm light slit, designed to be printed with an Ender 3. The part is 13x6x17.7 cm, and can easily block light from a smartphone flashlight or LED to create a thin sheet of light.
Ampliamento vasca rifiuti Bambu lab A1
can only hold pens owned by a true physicist
There are some models where the perforation in the profiles can be covered from the outside. This model can be used to cover the perforation in the profiles from the inside. Or if you use the hinged lid with your Prusa enclosure from the…
Single slit diffraction refers to the phenomenon where light passing through a narrow slit spreads out into a pattern of bright and dark fringes. When monochromatic light, such as from a laser, passes through a single slit, it diffracts…
slitta Iphone 16 pro max Cupra Formentor
Slither - Brenda is SOOOO hungry! = 2006 3D printable model.
Slit nozzle for AEG 2in1 Ergorapid which helps to remove e. g. dryed paint sparks if you painted your ceiling and forgot to cover the floor.
Remix filament guide with added slit for easy installation of filament. Also added a hole to hold the filament while not in use.
Made a slit in the round bases so you could use your Rat Ogres, Clanrats etc. in either The Old World or even Age of Sigmar edition because of the change of the base from square to round. Get decent quality with just a 0.4 nozzle, PLA in…
the model you see is 50% larger than its download models I recommend using hot glue or whatever bonds to the filament you prefer to use and not your fingers.
This is an illuminatable, hangable frame for McDonalds translites measuring 55x55cm / 22x22in used in the 80s and 90s to advertise Happy Meal toys. The frame can fit an LED-strip up to 220cm . The upper covers can be opened so you can…
The original design didn't fit on my Antilop legs for whatever reason. My legs have a slight bend at the top so maybe that was the problem. This design needs some sort of fastener below it in order for it not to slide down. I'll be trying…
A simple dexterity game where you should make pass this chip through the narrow slit. I provide 2 versions of the chip and a parametric OpenScad file, so you can personalize it further.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/8stmqTysuK3 Category: 3D Printing
Try the original double slit experiment from home with these 3D printed slits and a common laser pointer! Go as detailed as your printer can handle. Getting the slits nice and clean will give you a much better effect. Thickness of the…
This is a storage box for a large Gutermann thread reel and matching bobbin, to help keep matching threads and bobbins safe & secure. It will hold a single large (250m) reel of gutermann thread, and has space to hold a sewing machine…
Slither.io snakes (not articulated).
Added small ribbs for better strength at 130% scaling. Orginal was a little to squishy at 130% scaling, so i added small ribs for bether strength in the corners. At normal scale i recommend origanl because of less material.
Print this item to check your actual print measurements. Try it at a couple different densities to see if it makes a difference. Print two, one to use for testing slits in the other one. You may find you have to design your block or slit…
Parametric Slitting Saw Arbor. This thing has been inspired by Blondihacks Slitting Saw Arbor project. STL files have been generated for 2 hole sizes. Since the design is parametric, with little effort STLs for any other hole size can be…
Another machine tool wall mount holder. This one is to hold an R8 slitting saw arbor and blades. The arbor i have is for blades with a 1 inch centre hole, so it has a 40mm diameter ring at the end of the R8 arbor stub, the hole in the…
please refer https://www.printables.com/de/model/537014-original-prusa-enclosure-ope-slit-cover-plug
Made a slit in the oval bases so you could use your warpfire throwers etc. in either The Old World or even Age of Sigmar edition because of the change of the base from square to round/oval. Get decent quality with just a 0.4 nozzle, PLA…
Very similar to the original filament guide, but with a small slit in the ring for adding the filament
Summary PLAb System and Example Use Cases A component of the growing PLAb Collection of 3D printable optomechanics. This is a variable width optical slit mechanism with independent control of each side. It leverages a print-in-place…
Porta AirTag progettato per adattarsi ad una slitta Picatinny. Progettato per tenere traccia dell'attrezzatura montata su slitte Picatinny. Perfetto per attrezzature sportive, veicoli o altri strumenti che richiedono una…
If you do much machining, you may have noticed that most of the slitting saw arbors you will find for sale on Ebay and elsewhere are hot garbage. Luckily, there's at least one that is actually pretty nice, and here is a gridfinity tray…
For slit lamps with chin rest strip mounts ~90mm away from each other. You may use a piece of paper, lamination sheet, transparency, or equivalent that is cut to size to act as a barrier for the patient. Tips are appreciated if this helps…
This is a Gilbert Engineering BOAW Slit Support. Print 2, one for each side. Category: Other
The puzzle comes from the Erlebnisland Mathematik exhibition at the Technische Sammlungen Dresden. The task is to fit a three-dimensional figure consisting of a 5/4 cylinder through two square windows. The solution is in my video . EDIT:…
These are supports for slit cut Gilbert Engineering 46-270 Star. There are two different supports that you can print twice to cover both sides. Use both supports or pick one based on your preference. Category: Other
This is for the Gilbert Engineering 46-460 Star. They are additional supports when you get the star shipped to you slit. The normal additional pole support will give final rigidity. Two separate mounts and each mount can be used on both…
Storage bin for the Little Machine Shop 3" Slitting Saw Blades
Additional part for IR camera to mount to a slit lamp. Video Here: https://youtu.be/UW8AXtg6bPQ Holes must be aligned correctly with IR PCB to get horizontal captures with this holder. To be attached to this housing:…
Slightly different sized lid from the original and other remix.
Two models. One for smaller bottles like the ones from Dr. Brown and the larger model for the shorter larger bottle types.
Quick and dirty wall plug to cover up a hole after pulling a LC-LC fiber with the header/connector. I had to drill a 20mm hole to get the connector of the fiber cable through the wall. Made this one to cover up the hole a bit. I made it…
Compatible with standard R8 arbors for slitting saws, gear cutters, etc. Mine was purchased from https://littlemachineshop.com/products/product_view.php?ProductID=4647
A straight wand passes through a curved slit. Twice per turn. Without bending. The wand stands on a small turntable, leaning a little to the side. In front of it is a wall with two curved slits. Swing the wand round and it slides through…
Storage for the mandrel and slots for the saw blades. The blades are stored in the blade box which I printed vertically. this box is a snug fit in the saw box. By placing the blade box to the one end there remains a space at the top for…
