Gridfinity Mega Woodworking Drill Bit Organizer (5x1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drill bit organizer using the Gridfinity system by Zack Freedman.
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 2727
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Background:
This design fits a 1x5 Gridfinity mount.
This Model holds 3 of each common drill bit size, as well as a hex for each.
Sizes in mm are:
1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8, 9, 10.
There are also extra size 6 & 3.5 mm holes at the end for anything else, as well as lots of extra hex holders.
Printing:
The tolerances are quite tight, so nothing falls out, so I found if I printed it a bit too fast it was difficult to get the drill bits in. (especially if there's any stringing around the holes).
The text at the front can be painted over with a contrasting colour to clearly see the sizing better.
My slicer settings:
No Support
20% "Cube" Infill
1.2mm Layer Height
2 Walls (0.8mm)
0.6mm Top/Bottom Thickness
20mm Wall speed
Coming mode: "Not in skin" (+ Avoid Support + Avoid Printed parts)
Ironing Enabled
Notes:
Sorry about the stupidly large file size, I made this in blender and subdivided a bit much.
Bits are packed quite close together, so if you've got less bits, there are better solutions out there for just one set, but this was best for my needs.
There is only one slot for a size 9 drill bit, as I found this not to be very common, and never included in sets. (that I had anyway)
The 5x1 wall mount was not designed by me, but I just added it for convince (I cannot remember who I got it from, sorry)
I am very new to 3D printing and modelling, so if there's any issues please let me know : )