Switch Card Sleeve for HORI 24 card case (see summary)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I printed this I did it in halves and super glued them together.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 836
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I printed this I did it in halves and super glued them together.
This creates a good friction fit when the 12 Switch card holder is slipped into this 3D printed sleeve.
I uploaded a Full Sleeve and a Half Sleeve version so you can have a sleeve thats one solid color or 2 half colors.
I used simplify3d to slice my print into 3 processes
I unfortunately didn't record all those but the GCode that i used to print is uploaded.
Feel free to play with the design or suggest any other ideas.
This was my first practical print for my friend and I hope it will work for anyone else out there, with this case :p (see link below)
https://www.amazon.com/HORI-Game-Nintendo-Switch-Officially-Licensed/dp/B01NASY99Z
Print instructions
==============
Printer: Qidi Tech X-one2
Rafts: No
Supports: No
Resolution: .3
Infill: 5-15%
Filament: Hatchbox 3D PLA Red and Blue