1 / 6
Switch Card Sleeve for HORI 24 card case (see summary) — image 1
1 / 6

Switch Card Sleeve for HORI 24 card case (see summary)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

When I printed this I did it in halves and super glued them together.

Rating
0 / 5
Likes
11
Downloads
74
Makes
0
Views
836
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

When I printed this I did it in halves and super glued them together.
This creates a good friction fit when the 12 Switch card holder is slipped into this 3D printed sleeve.

I uploaded a Full Sleeve and a Half Sleeve version so you can have a sleeve thats one solid color or 2 half colors.

I used simplify3d to slice my print into 3 processes

I unfortunately didn't record all those but the GCode that i used to print is uploaded.

Feel free to play with the design or suggest any other ideas.
This was my first practical print for my friend and I hope it will work for anyone else out there, with this case :p (see link below)
https://www.amazon.com/HORI-Game-Nintendo-Switch-Officially-Licensed/dp/B01NASY99Z

Print instructions

==============

Printer: Qidi Tech X-one2

Rafts: No

Supports: No

Resolution: .3

Infill: 5-15%

Filament: Hatchbox 3D PLA Red and Blue

Tags