1 / 10
Tripod End Table With Voronoi Detail (Includes Router & Drilling Templates) — zdjęcie 1
1 / 10

Tripod End Table With Voronoi Detail (Includes Router & Drilling Templates)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parts to make your own end table with the addition of some timber and screws.

Ocena
0 / 5
Polubienia
16
Pobrania
35
Wydruki
0
Wyświetlenia
422
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This end table was designed out of necessity. It requires you to supply the timber, screws and tools necessary to build it. It was a surprisingly easy item to make using the 3D printed templates included.

Voronoi detail is in the circular mid-brace part.

Parts Supplied (To Be 3D Printed)

  • End Table Top Bracket (3 required)
  • End Table Foot (3 required)
  • End Table Mid Brace (1 required)

Parts are printed with 4 outer perimeters for strength.

You Need To Supply

  • Timber board of your choice - at least 405mm square and 17mm thick.
  • Timber dowel 25.4mm (1 inch) diameter.
  • 20mm timber screws (15 required).
  • Makita M3700G Trimmer (Router). May fit other router/trimmers but I can't say which ones!
  • 6.4mm straight plunge router bit.
  • 45˚ chamfer bit.
  • 2.5 or 3mm drill bit and drill.
  • Philips driver bit.

Blog post with links to video guides here.

https://lannix3d.com.au/2022/08/03/end-table-with-3d-printed-parts/

Tagi