1 / 10
Tripod End Table With Voronoi Detail (Includes Router & Drilling Templates)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts to make your own end table with the addition of some timber and screws.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 35
- Makes
- 0
- Views
- 422
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This end table was designed out of necessity. It requires you to supply the timber, screws and tools necessary to build it. It was a surprisingly easy item to make using the 3D printed templates included.
Voronoi detail is in the circular mid-brace part.
Parts Supplied (To Be 3D Printed)
- End Table Top Bracket (3 required)
- End Table Foot (3 required)
- End Table Mid Brace (1 required)
Parts are printed with 4 outer perimeters for strength.
You Need To Supply
- Timber board of your choice - at least 405mm square and 17mm thick.
- Timber dowel 25.4mm (1 inch) diameter.
- 20mm timber screws (15 required).
- Makita M3700G Trimmer (Router). May fit other router/trimmers but I can't say which ones!
- 6.4mm straight plunge router bit.
- 45˚ chamfer bit.
- 2.5 or 3mm drill bit and drill.
- Philips driver bit.
Blog post with links to video guides here.
https://lannix3d.com.au/2022/08/03/end-table-with-3d-printed-parts/