1 / 5
Motorola RMM2050 MURS Radio Desk Stand — zdjęcie 1
1 / 5

Motorola RMM2050 MURS Radio Desk Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Desk stand for Motorola RMM2050 MURS handheld transceiver

Ocena
0 / 5
Polubienia
2
Pobrania
47
Wydruki
0
Wyświetlenia
523
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this so my RMM2050 wouldn't be so “tippy” when I set it down on my desk or other level, stationary surface.

It has a single hole in the bottom so you can fasten the holder to your surface if desired.  Otherwise I recommend adding little rubber feet to the bottom for best stability.  The radio is a nice loose (but not too loose) fit so you can drop it in or easily pick it up.

I printed mine in black Prusament PETG with 4 perimeters, 0.4mm nozzle, 0.2mm layer height and 10% infill.  Print time approximately 1:45.

Cheers and happy making!

PS - I sell these on my Etsy store in case you know anybody who wants one but can't make it themselves.  https://www.etsy.com/shop/BlackLodgeCreative

Tagi