1 / 1
Latte Panda Alpha/Delta Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick case design made for a Latte Panda Delta I use that lacks a good home.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 880
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Just a quick case design I made as the previous design that I liked wasn't exactly a perfect fit, so I wanted to design something a bit more forgiving in terms of tolerances.
Two halves are joined by four M3 screws from the top with the SBC sandwiched in the middle. The screws will cut their own threads. I used M3x16's.
I printed this in PETG as I had some to use up, and as such my times are a bit slow with the provided files.