FT5 Z Stop FolgerTech Titan V6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modification from the original by Morskipas. I extended it to allow for the longer body of the E3D Titan V6…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a modification from the original by Morskipas. I extended it to allow for the longer body of the E3D Titan V6 mounted on the 713Maker.com bracket.
I will be modifying this as needed.
Assembly is easy.
- Print with orientation as shown in the image.
- Disconnect from power
- Remove Z stop from the thin supplied bracket
- Install it on the newly printed bracket (there is space for back of board solder tails)
- Install T nuts and hex bolts
- Install on 20 20 rail
- Get long bolt and a nut left over from the build (should have a few left over).
- Get a small washer and a pen spring (rip apart an old pen, not your wife's favorite)
- Get a square nut for the top.
- Put it all together as shown in the photo.
That is it, just get it rough with an auto- home and then do fine adjustments by moving the screw up or down as needed
Print Settings
Printer:
FolgerTech FT5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.200
Infill:
95%
Notes:
You will want high infill for this as it will be flexed quite often under use. Every z home command will bend it slightly. At 95% this is a very strong part and can be threaded if you need to.
Assemble as shown here
Part 1. Part 2 will include this bracket (I am filming this right now)
How I Designed This ===================What I used?
I am brand new to 3D printing and modelling so I used Tinkercad. I imported the file from Thingiverse into Tinkercad. I then copied it with the tools and primitives in Tinkercad. Finally I threw on some text to brand it FT5.
Hope you enjoy it!Category: 3D Printer Parts