CR/BL-touch mount Y-offset spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10mm Offset spacer in between the CR/BL-touch metal mount and the carriage. Included .step file so you can adapt.
- Ocena
- 4 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 364
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I quickly created this spacer so my CR touch with the Creality metal mount would clear the X-axis bracket with an integrated filament runout sensor found here by matthijsbos.
Unfortunatly the CR touch will hit the bracket before the carriage can trigger the X-endstop.
I use a Micro Swiss Direct drive kit, so the spacer would need to be even thicker if you use the original Ender carriage and fan cover. I have included a .step file so you can adapt it to your situation.
Don't forget to change the probe offset Y-value -10.
This model is offered free of charge, but you can always support my work and buy me a coffee ;)