CR/BL-touch mount Y-offset spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
10mm Offset spacer in between the CR/BL-touch metal mount and the carriage. Included .step file so you can adapt.
- Rating
- 4 / 5
- Likes
- 4
- Downloads
- 28
- Makes
- 1
- Views
- 364
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
I quickly created this spacer so my CR touch with the Creality metal mount would clear the X-axis bracket with an integrated filament runout sensor found here by matthijsbos.
Unfortunatly the CR touch will hit the bracket before the carriage can trigger the X-endstop.
I use a Micro Swiss Direct drive kit, so the spacer would need to be even thicker if you use the original Ender carriage and fan cover. I have included a .step file so you can adapt it to your situation.
Don't forget to change the probe offset Y-value -10.
This model is offered free of charge, but you can always support my work and buy me a coffee ;)